Imperial Spur Gears in Steel 24DP, 20° P.A

Imperial Spur Gears in Steel 24DP, 20° P.A

669-banner
  • Intermediate sizes and special gears
    to drawing up to 39″ diameter
  • Standard tolerances, unless
    otherwise stated ±0.010 ins
  • Standard: BS 436 Pt1, fig 1. Grade 8 / 9
  • All dimensions in inches
  • Steel EN8, (080M40/080M46) or equivalent
Code No. of Teeth Pitch Ø dp Outside Ø de Hub/Boss Ø dm Bore Ø H8 O/A Width A Face Width B
SSDP24/15B 15 0.625 0.708 0.484 0.3125 0.625 0.312
SSDP24/20B 20 0.833 0.916 0.625 0.3125 0.625 0.312
SSDP24/24B 24 1 1.083 0.625 0.3125 0.625 0.312
SSDP24/25B 25 1.042 1.125 0.625 0.3125 0.625 0.312
SSDP24/30B 30 1.250 1.333 0.750 0.375 0.75 0.312
SSDP24/35B 35 1.458 1.541 0.750 0.375 0.75 0.312
SSDP24/40B 40 1.667 1.750 0.750 0.375 0.75 0.312
SSDP24/45B 45 1.875 1.958 0.750 0.375 0.75 0.312
SSDP24/48B 48 2 2.083 0.750 0.375 0.75 0.312
SSDP24/50B 50 2.083 2.166 0.750 0.375 0.75 0.312
SSDP24/55B 55 2.292 2.375 0.750 0.375 0.75 0.312
SSDP24/60B 60 2.500 2.583 1 0.5 0.812 0.312
SSDP24/63B 63 2.625 2.708 1 0.5 0.812 0.312
SSDP24/65B 65 2.708 2.791 1 0.5 0.812 0.312
SSDP24/70B 70 2.917 3 1 0.5 0.812 0.312
SSDP24/75B 75 3.125 3.208 1 0.5 0.812 0.312
SSDP24/80B 80 3.333 3.416 1 0.5 0.812 0.312
SSDP24/85B 85 3.542 3.625 1.250 0.5 0.937 0.312
SSDP24/90B 90 3.750 3.833 1.250 0.5 0.937 0.312
SSDP24/95B 95 3.958 4.041 1.250 0.5 0.937 0.312
SSDP24/96B 96 4 4.083 1.250 0.5 0.937 0.312
SSDP24/100B 100 4.167 4.250 1.250 0.5 0.937 0.312
SSDP24/120B 120 5 5.083 1.250 0.5 0.937 0.312

Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.For special or reworked gears please contact our Manufacturing Department for a quotation.