Imperial Spur Gears in Steel 32DP, 20° P.A

Imperial Spur Gears in Steel 32DP, 20° P.A

669-banner
  • Intermediate sizes and special gears
    to drawing up to 39″ diameter
  • Standard tolerances, unless
    otherwise stated ±0.010 ins
  • Standard: BS 436 Pt1, fig 1. Grade 8 / 9
  • All dimensions in inches
  • Steel EN8, (080M40/080M46) or equivalent
Code No. of Teeth Pitch Ø dp Outside Ø de Hub/Boss Ø dm Bore Ø H8 O/A Width A Face Width B
SSDP32/15B 15 0.469 0.531 0.359 0.188 0.562 0.25
SSDP32/16B 16 0.5 0.562 0.359 0.188 0.562 0.25
SSDP32/20B 20 0.625 0.687 0.5 0.25 0.5 0.25
SSDP32/25B 25 0.781 0.843 0.5 0.25 0.5 0.25
SSDP32/30B 30 0.938 1 0.5 0.25 0.5 0.25
SSDP32/32B 32 1 1.062 0.5 0.25 0.5 0.25
SSDP32/35B 35 1.094 1.156 0.625 0.313 0.563 0.25
SSDP32/40B 40 1.25 1.312 0.625 0.313 0.563 0.25
SSDP32/45B 45 1.406 1.468 0.625 0.313 0.563 0.25
SSDP32/50B 50 1.563 1.625 0.625 0.313 0.563 0.25
SSDP32/55B 55 1.719 1.781 0.625 0.313 0.563 0.25
SSDP32/60B 60 1.875 1.937 0.75 0.375 0.625 0.25
SSDP32/63B 63 1.969 2.031 0.75 0.375 0.625 0.25
SSDP32/64B 64 2 2.062 0.75 0.375 0.625 0.25
SSDP32/65B 65 2.031 2.093 0.75 0.375 0.625 0.25
SSDP32/70B 70 2.188 2.25 0.75 0.375 0.625 0.25
SSDP32/75B 75 2.344 2.406 0.75 0.375 0.625 0.25
SSDP32/80B 80 2.5 2.562 0.75 0.375 0.625 0.25
SSDP32/85B 85 2.656 2.718 0.75 0.375 0.625 0.25
SSDP32/90B 90 2.813 2.875 0.75 0.375 0.625 0.25
SSDP32/95B 95 2.969 3.031 0.75 0.375 0.625 0.25
SSDP32/96B 96 3 3.062 0.75 0.375 0.625 0.25
SSDP32/100B 100 3.125 3.187 0.75 0.375 0.625 0.25
SSDP32/120B 120 3.75 3.812 0.75 0.375 0.625 0.25

Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.For special or reworked gears please contact our Manufacturing Department for a quotation.