Imperial Mitre Gears Nylon 48/32/24/16 DP

Imperial Moulded Mitre Gear Sets
in Nylon 6, 30% glass filled 48, 32, 24 & 16 DP 1 : 1 Ratio

20° pressure angle
Bore tolerance as below
Supplied in pairs

Intermediate sizes & Special mitres to drawing (tooling charges may apply)
All dimensions in inches

Shaft axes to intersect within +/- 0.001
Angular accuracy between shafts +/- 5mins
Mounting distance tolerance +0 / – 0.002
Standard tolerances, unless otherwise stated ±0.010 ins.

Please note : All dimensions including bore sizes subject to change.
If a dimension is critical to your application please contact our sales department for confirmation.
for special gears or reworkedgears please contact our manufacturing department.

Code DP No. Teeth dp (ins) de (ins) dm (ins) Bore +0.001 -0.002 F (ins) Lm (ins) A (ins) V+A (ins)
PBMDP16/16 16 16 1.000 1.090 0.750 0.375 0.236 0.437 0.750 1.063
PBMDP16/32 32 2.000 2.088 1.250 0.500 0.400 0.375 0.875 1.562
PBMDP24/24 24 24 1.000 1.050 0.625 0.252 0.182 0.188 0.562 0.906
PBMDP24/30 30 1.250 1.310 0.625 0.250 0.220 0.312 0.578 1.031
PBMDP24/36 36 1.500 1.560 0.687 0.312 0.205 0.312 0.609 1.187
PBMDP32/16 32 16 0.500 0.550 0.406 0.187 0.114 0.187 0.344 0.500
PBMDP32/24 24 0.750 0.800 0.500 0.187 0.110 0.187 0.406 0.687
PBMDP48/15 48 15 0.313 0.350 0.250 0.125 0.088 0.125 0.219 0.312
PBMDP48/18 18 0.375 0.404 0.328 0.125 0.082 0.187 0.281 0.406
PBMDP48/24 24 0.500 0.529 0.375 0.187 0.118 0.250 0.375 0.531