Imperial Mitre Gear Sets in Steel, 5 – 32 DP

Imperial Mitre Gear Sets in Steel, 5 – 32 DP

702
  • Intermediate sizes and special mitres to drawing
  • DIN 3964, DIN 3967, DIN 3971
  • Standard tolerances, unless otherwise stated ±0.25 mm
  • Shaft axis to intersect within ±0.025mm
  • Angular accuracy between shafts ±5mins
  • Mounting distance tolerance ±0.05mm
  • Bore tolerance H8
  • Cut to the Gleason System
  • 20° pressure angle
  • Supplied in pairs
  • All dimensions in mm
  • Steel EN8, (080M40/080M46) or equivalent 1:1 Ratio
Code DP No. Teeth dp (in) de (in) dm (in) Bore (in) F (in) Lm (in) A (in) V+A (in) S (in)
SBMDP5/24 5 24 4.80 5.083 3.845 1.250 1.125 1.123 2.481 4 0
SBMDP6/24 6 24 4 4.236 3.125 1 1 1.062 2.275 3.500 0
SBMDP8/24 8 24 3 3.177 2.343 0.625 0.625 0.952 1.749 2.750 0
SBMDP10/20 10 20 2 2.141 1.562 0.625 0.500 0.531 1.145 1.750 0
SBMDP10/24 10 24 2.40 2.541 1.875 0.625 0.550 0.630 1.362 2.125 0
SBMDP10/25 10 25 2.50 2.641 1.875 0.750 0.562 0.561 1.315 2.124 0
SBMDP12/18 12 18 1.50 1.618 1.250 0.375 0.330 0.505 0.896 1.375 0
SBMDP12/24 12 24 2 2.118 1.602 0.500 0.375 0.801 1.306 2 0
SBMDP16/16 16 16 1 1.088 0.780 0.312 0.234 0.455 0.756 1.064 0
SBMDP16/32 16 32 2 2.088 1.700 0.500 0.450 0.351 0.846 1.500 0
SBMDP20/12 20 12 0.60 0.656 0.500 0.250 0.120 0.312 0.484 0.671 0
SBMDP20/18 20 18 0.90 0.956 0.625 0.312 0.140 0.406 0.625 0.953 0
SBMDP20/20 20 20 1 1.056 0.750 0.375 0.234 0.500 0.812 1.125 0
SBMDP20/25 20 25 1.25 1.310 1 0.375 0.250 0.437 0.750 1.188 0
SBMDP24/18 24 18 0.75 0.803 0.625 0.250 0.156 0.375 0.562 0.813 0
SBMDP24/24 24 24 1 1.053 0.625 0.250 0.200 0.281 0.562 0.906 0
SBMDP24/30* 24 30 1.25 1.309 0.937 0.250 0.300 0.307 0.636 1.031 0
SBMDP24/36* 24 36 1.50 1.559 1.300 0.312 0.312 0.338 0.677 1.187 0
SBMDP32/16 32 16 0.50 0.540 0.406 0.188 0.120 0.188 0.344 0.500 0
SBMDP32/24 32 24 0.75 0.790 0.500 0.188 0.140 0.250 0.422 0.688 0
SBMDP32/32* 32 32 1 1.044 0.781 0.250 0.250 0.265 0.565 0.875 0

Please note: * Supplied with black oxide finish. All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation. For special or reworked gears please contact our Manufacturing Department for a quotation.