Metric Mitre Gear Sets in Acetal/DELRIN®, 0.8 – 5 MOD

Metric Mitre Gear Sets in Acetal/DELRIN®, 0.8 – 5 MOD

697
  • Intermediate sizes and special mitres to drawing (tooling charges may apply)
  • Standard tolerances, unless otherwise stated ±0.25 mm
  • Shaft axis to intersect within ±0.025mm
  • Angular accuracy between shafts ±5mins
  • Mounting distance tolerance ±0.05mm
  • Bore tolerance H8
  • Max. recommended working
    temperature 90°C
  • Cut to the Gleason System
  • 20° pressure angle
  • Supplied in pairs
  • All dimensions in mm
  • Acetal/DELRIN® 1:1 Ratio
Code Pitch Module No. Teeth dp (mm) de (mm) dm (mm) Bore H8 F (mm) Lm (mm) A (mm) V+A (mm) S (mm)
DBM08/25 0.8 25 20 21.13 16 6 4.24 8 13.36 20 0
DBM10/16 1 16 16 17.4 13.3 4 4 6.5 11.2 16 0
DBM10/19 1 19 19 20.4 15.3 4 4 6.5 11.8 18 0
DBM10/22 1 22 22 23.4 15.3 5 4.7 5.5 12.8 20 0
DBM10/25 1 25 25 26.4 22 8 5.3 10.8 16.68 25 0
DBM10/26 1 26 26 27.4 20.3 5 5.5 7 13.3 22 0
DBM10/30 1 30 30 31.4 20.3 5 6.4 8 16 26 0
DBM12.5/25 1.25 25 31.25 33 25 8 7 9.2 17.87 28 0
DBM15/25 1.5 25 37.5 39.62 32 10 8 13.5 22.57 35 0
BPBM20/20** 2.0 20 40 42.83 34 10 10 14 24.89 37 2.89
DBM20/25 2.0 25 50 52.83 40 12 10.6 12 25.52 42 0
BPBM25/20** 2.5 20 50 53.54 42 12 12 19 32.54 48 3.54
DBM25/25 2.5 25 62.5 66 55 15 15 15 30.5 50 0
DBM40/16 ¥ 4 16 64 69.6 50 15 15 16.49 35.81 55.5 0
DBM50/16 § 5 16 80 87.1 60 18 20 20 46.13 70 0

Please note: * Supplied with black oxide finish. All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation. For special or reworked gears please contact our Manufacturing Department for a quotation.