Imperial Racks in Steel, 4 – 32 DP, 20° P.A

Imperial Racks in Steel, 4 – 32 DP, 20° P.A

688-banner
  • Can be induction or flame hardened
  • Intermediate sizes and special racks
    to drawing
  • Standard tolerances, unless
    otherwise stated ±0.010″
  • Standard: BS 436 Pt1, fig 1. Grade 8 / 9
  • All dimensions in mm
  • All dimensions in inches except where shown
  • Steel EN8, (080M40/080M46/C45)
    normalised or equivalent
Code Pitch DP Width B Overall height A Height to pitch Line hp Length L (mm)
SRDP4/38/.5 4 1.5″ 1.5″ 1.25″ 500
SRDP4/38/1 4 1.5″ 1.5″ 1.25″ 1000
SRDP4/38/2 4 1.5″ 1.5″ 1.25″ 2000
SRDP6/38/.5 6 1.5″ 1.5″ 1.333″ 500
SRDP6/38/1 6 1.5″ 1.5″ 1.333″ 1000
SRDP6/38/2 6 1.5″ 1.5″ 1.333″ 2000
SRDP8/32/.5 8 1.25″ 1.25″ 1.125″ 500
SRDP8/32/1 8 1.25″ 1.25″ 1.125″ 1000
SRDP8/32/2 8 1.25″ 1.25″ 1.125″ 2000
SRDP10/25/.5 10 1.0″ 1.0″ 0.9″ 500
SRDP10/25/1 10 1.0″ 1.0″ 0.9″ 1000
SRDP10/25/2 10 1.0″ 1.0″ 0.9″ 2000
SRDP12/19/.3 12 0.75″ 0.75″ 0.667″ 300
SRDP12/19/.5 12 0.75″ 0.75″ 0.667″ 500
SRDP12/19/1 12 0.75″ 0.75″ 0.667″ 1000
SRDP12/19/2 12 0.75″ 0.75″ 0.667″ 2000
SRDP16/12/.3 16 0.5″ 0.5″ 0.437″ 300
SRDP16/12/.5 16 0.5″ 0.5″ 0.437″ 500
SRDP16/12/1 16 0.5″ 0.5″ 0.437″ 1000
SRDP16/12/2 16 0.5″ 0.5″ 0.437″ 2000
SRDP20/9/.3 20 0.375″ 0.375″ 0.325″ 300
SRDP20/9/.5 20 0.375″ 0.375″ 0.325″ 500
SRDP20/9/1 20 0.375″ 0.375″ 0.325″ 1000
SRDP20/9/2 20 0.375″ 0.375″ 0.325″ 2000
SRDP24/8/.3 24 0.312″ 0.312″ 0.270″ 300
SRDP24/8/.5 24 0.312″ 0.312″ 0.270″ 500
SRDP24/8/1 24 0.312″ 0.312″ 0.270″ 1000
SRDP24/8/2 24 0.312″ 0.312″ 0.270″ 2000
SRDP32/6/.3 32 0.25″ 0.25″ 0.219″ 300
SRDP32/6/.5 32 0.25″ 0.25″ 0.219″ 500
SRDP32/6/1 32 0.25″ 0.25″ 0.219″ 1000
SRDP32/6/2 32 0.25″ 0.25″ 0.219″ 2000

Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.
For special or reworked racks please contact our Manufacturing Department for a quotation.