Metric Round Section Racks in Steel 1 – 4 MOD, 20° P.A

Metric Round Section Racks in Steel 1 – 4 MOD, 20° P.A

683-banner
  • Can be induction or flame hardened
  • Intermediate sizes and special racks
    to drawing
  • Standards: to DIN 867, 3962, 3963,
    Grade/Quality 9 or equivalent
  • Standard tolerances, unless
    otherwise stated ±0.25mm
  • All dimensions in mm
  • Steel EN8, (080M40, 080M46,
    212A42), normalised or equivalent
Code Pitch module Rack Ø B H6 Pitch height tolerance Height to pitch line hp Length L
SR10/10R/.5 1 10 +0mm / – 0.05mm 9 500
SR10/10R/1 1 10 +0mm / – 0.05mm 9 1000
SR15/15R/.5 1.5 15 +0mm / – 0.05mm 13.5 500
SR15/15R/1 1.5 15 +0mm / – 0.05mm 13.5 1000
SR15/15R/2 1.5 15 +0mm / – 0.05mm 13.5 2000
SR20/20R/.5 2 20 +0mm / – 0.05mm 18 500
SR20/20R/1 2 20 +0mm / – 0.05mm 18 1000
SR20/20R/2 2 20 +0mm / – 0.05mm 18 2000
SR25/25R/.5 2.5 25 +0mm / – 0.05mm 22.5 500
SR25/25R/1 2.5 25 +0mm / – 0.05mm 22.5 1000
SR30/30R/.5 3 30 +0mm / – 0.05mm 27 500
SR30/30R/1 3 30 +0mm / – 0.05mm 27 1000
SR30/30R/2 3 30 +0mm / – 0.05mm 27 2000
SR40/40R/.5 4 40 +0mm / – 0.05mm 36 500
SR40/40R/1 4 40 +0mm / – 0.05mm 36 1000

Metric Round Section Rack in Stainless Steel 2 MOD, 20° p.a.

Code Pitch module Rack Ø B H8 Pitch height tolerance Height to pitch line hp Length L
STR20/20R/1C 2 20 +0 / – 0.05mm 18 1000
  • Stainless Steel – AISI 303/304

Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.
For special or reworked racks please contact our Manufacturing Department for a quotation.