Metric Spur Gears in 30% Glass-Filled Nylon 6, 1.5 MOD, 20° P.A

Metric Spur Gears in 30% Glass-Filled Nylon 6, 1.5 MOD, 20° P.A

648-banner
  • Intermediate sizes and special gears to
    drawing (tooling charges may apply)
  • Bore unmachined typically 0.5-1mm undersize
  • Standard tolerances, unless
    otherwise stated ±0.25mm
  • Max recommended working temperature 130°C
  • All dimensions in mm
  • Moulded Nylon 6 (PA6), 30% Glass filled
Code No. of Teeth Pitch Ø B Pre-bore (rough) Hub/Boss Ø D Outside Ø A O/A Width F Face Width G
PS15/12B 12 18 5 14 21 30 17
PS15/13B 13 19.5 5 16 22.5 30 17
PS15/14B 14 21 5 16 24 30 17
PS15/15B 15 22.5 5 18 25.5 30 17
PS15/16B 16 24 5 18 27 30 17
PS15/17B 17 25.5 5 18 28.5 30 17
PS15/18B 18 27 5 18 30 30 17
PS15/19B 19 28.5 8 25 31.5 30 17
PS15/20B 20 30 8 25 33 30 17
PS15/21B 21 31.5 8 25 34.5 30 17
PS15/22B 22 33 8 28 36 30 17
PS15/23B 23 34.5 8 28 37.5 30 17
PS15/24B 24 36 8 28 39 30 17
PS15/25B 25 37.5 8 30 40.5 30 17
PS15/26B 26 39 8 30 42 30 17
PS15/27B 27 40.5 8 30 43.5 30 17
PS15/28B 28 42 8 30 45 30 17
PS15/30B 30 45 12 35 48 30 17
PS15/32B 32 48 12 35 51 30 17
PS15/35B 35 52.5 12 35 55.5 30 17
PS15/36B 36 54 16 35 57 30 17
PS15/38B 38 57 16 35 60 30 17
PS15/40B 40 60 16 40 63 30 17
PS15/42B 42 63 16 45 66 30 17
PS15/44B 44 66 16 45 69 30 17
PS15/45B 45 67.5 16 45 70.5 30 17
PS15/46B 46 69 16 45 72 30 17
PS15/48B 48 72 16 45 75 30 17
PS15/50B 50 75 16 45 78 30 17
PS15/52B 52 78 20 50 81 30 17
PS15/54B 54 81 20 50 84 30 17
PS15/55B 55 82.5 20 50 85.5 30 17
PS15/60B 60 90 20 60 93 30 17
PS15/65B 65 97.5 20 60 100.5 30 17
PS15/70B 70 105 20 60 108 30 17
PS15/75B 75 112.5 20 60 115.5 30 17
PS15/104B 104 156 25 60 159 30 17

Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.For special or reworked gears please contact our Manufacturing Department for a quotation.

It is recommended that when the bores in ‘PS’ Moulded Spur Gears are machined they are machined to the bore size stated or very close to the catalogue size. Boring these Gears to a much larger bore diameter could increase the possibility of discovering small voids or cavities in this area.