Metric Spur Gears in 30% Glass-Filled Nylon 6, 2.0 MOD, 20° P.A

Metric Spur Gears in 30% Glass-Filled Nylon 6, 2.0 MOD, 20° P.A

648-banner
  • Intermediate sizes and special gears to
    drawing (tooling charges may apply)
  • Bore unmachined typically 0.5-1mm undersize
  • Standard tolerances, unless
    otherwise stated ±0.25mm
  • Max recommended working temperature 130°C
  • All dimensions in mm
  • Moulded Nylon 6 (PA6), 30% Glass filled
Code No. of Teeth Pitch Ø B Pre-bore (rough) Hub/Boss Ø D Outside Ø A O/A Width F Face Width G
PS20/12B 12 24 8 18 28 35 20
PS20/13B 13 26 8 18 30 35 20
PS20/14B 14 28 8 20 32 35 20
PS20/15B 15 30 8 22 34 35 20
PS20/16B 16 32 8 25 36 35 20
PS20/17B 17 34 8 25 38 35 20
PS20/18B 18 36 10 30 40 35 20
PS20/19B 19 38 10 30 42 35 20
PS20/20B 20 40 10 30 44 35 20
PS20/21B 21 42 10 30 46 35 20
PS20/22B 22 44 10 30 48 35 20
PS20/23B 23 46 10 35 50 35 20
PS20/24B 24 48 10 35 52 35 20
PS20/25B 25 50 10 35 54 35 20
PS20/26B 26 52 14 40 56 35 20
PS20/27B 27 54 14 40 58 35 20
PS20/28B 28 56 14 40 60 35 20
PS20/29B 29 58 14 40 62 35 20
PS20/30B 30 60 14 40 64 35 20
PS20/31B 31 62 14 40 66 35 20
PS20/32B 32 64 16 45 68 35 20
PS20/33B 33 66 16 45 70 35 20
PS20/34B 34 68 16 45 72 35 20
PS20/35B 35 70 16 45 74 35 20
PS20/36B 36 72 16 50 76 35 20
PS20/37B 37 74 16 50 78 35 20
PS20/38B 38 76 16 50 80 35 20
PS20/39B 39 78 16 50 82 35 20
PS20/40B 40 80 16 50 84 35 20
PS20/41B 41 82 16 60 86 35 20
PS20/42B 42 84 16 60 88 35 20
PS20/43B 43 86 16 60 90 35 20
PS20/44B 44 88 16 60 92 35 20
PS20/45B 45 90 16 60 94 35 20
PS20/46B 46 92 16 60 96 35 20
PS20/47B 47 94 16 60 98 35 20
PS20/48B 48 96 16 60 100 35 20
PS20/49B 49 98 16 60 102 35 20
PS20/50B 50 100 16 60 104 35 20
PS20/51B 51 102 20 60 106 35 20
PS20/52B 52 104 20 60 108 35 20
PS20/53B 53 106 20 60 110 35 20
PS20/54B 54 108 20 60 112 35 20
PS20/55B 55 110 20 60 114 35 20
PS20/56B 56 112 20 60 116 35 20
PS20/57B 57 114 20 60 118 35 20
PS20/58B 58 116 20 60 120 35 20
PS20/59B 59 118 20 60 122 35 20
PS20/60B 60 120 20 60 124 35 20

Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.For special or reworked gears please contact our Manufacturing Department for a quotation.