Metric Spur Gears in Moulded DELRIN® 500, 0.8 MOD, 20° P.A

Metric Spur Gears in Moulded DELRIN® 500, 0.8 MOD, 20° P.A

665-banner
  • Intermediate sizes and special gears
    to drawing (tooling charges may apply)
  • Standard tolerances, unless
    otherwise stated ±0.25mm
  • All dimensions in mm
  • Moulded DELRIN® 500
    to gear quality AGMA 7
Code No. of Teeth Pitch Ø B Bore (-0.02/-0.04) Hub/Boss Ø D Outside Ø A O/A Width F Face Width G
DS08/12B 12 9.6 3 6 11.2 9 4
DS08/15B 15 12 3 6 13.6 9 4
DS08/16B 16 12.8 4 8 14.4 9 4
DS08/18B 18 14.4 4 8 16 9 4
DS08/20B 20 16 5 10 17.6 9 4
DS08/24B 24 19.2 5 10 20.8 9 4
DS08/25B 25 20 5 10 21.6 9 4
DS08/28B 28 22.4 5 10 24 9 4
DS08/30B 30 24 6 12 25.6 9 4
DS08/32B 32 25.6 6 12 27.2 9 4
DS08/35B 35 28 6 12 29.6 9 4
DS08/36B 36 28.8 6 12 30.4 9 4
DS08/40B 40 32 6 12 33.6 9 4
DS08/48B 48 38.4 6 14.5 40 10 4
DS08/50B 50 40 6 14.5 41.6 10 4
DS08/56B 56 44.8 6 14.5 46.4 10 4
DS08/60B 60 48 6 14.5 49.6 10 4
DS08/64B 64 51.2 6 15.5 52.8 10 4
DS08/70B 70 56 6 15.5 57.6 10 4
DS08/72B 72 57.6 6 15.5 59.2 10 4
DS08/80B 80 64 6 15.5 65.6 10 4

Sintered Bronze Bushes type OB

Code Bore Ø
(mm)
Outside Ø D
(mm)
Length F
(mm)
Use with
OB368 3 6 8 DS08
OB469 4 6 9 DS08
  • Intermediate sizes and
    special bushes to drawing
    (tooling charges may apply)
  • All dimensions in mm
  • Bore tolerance G7
  • OD tolerance s7
  • Length tolerance js13
665-banner-bottom

Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.For special or reworked gears please contact our Manufacturing Department for a quotation.