Metric Spur Gears in Moulded DELRIN® 500, 1.0 MOD, 20° P.A

Metric Spur Gears in Moulded DELRIN® 500, 1.0 MOD, 20° P.A

665-banner
  • Intermediate sizes and special gears
    to drawing (tooling charges may apply)
  • Standard tolerances, unless
    otherwise stated ±0.25mm
  • All dimensions in mm
  • Moulded DELRIN® 500
    to gear quality AGMA 7
Code No. of Teeth Pitch Ø B Bore (-0.02/-0.04) Hub/Boss Ø D Outside Ø A O/A Width F Face Width G
DS10/12B 12 12 4 8 14 12 6
DS10/15B 15 15 4 8 17 12 6
DS10/16B 16 16 5 10 18 12 6
DS10/18B 18 18 5 10 20 12 6
DS10/20B 20 20 5 11.7 22 12 6
DS10/24B 24 24 5 11.7 26 12 6
DS10/25B 25 25 5 11.7 27 12 6
DS10/28B 28 28 5 11.7 30 12 6
DS10/30B 30 30 6 14 32 12 6
DS10/32B 32 32 6 14 34 12 6
DS10/35B 35 35 6 14 37 12 6
DS10/36B 36 36 6 14 38 12 6
DS10/40B 40 40 8 16 42 12 6
DS10/45B 45 45 8 16 47 12 6
DS10/48B 48 48 8 16 50 14 6
DS10/50B 50 50 8 16 52 14 6
DS10/56B 56 56 8 18 58 14 6
DS10/60B 60 60 8 18 62 14 6
DS10/64B 64 64 8 18 66 14 6
DS10/70B 70 70 8 18 72 14 6
DS10/72B 72 72 8 18 74 14 6
DS10/80B 80 80 8 18 82 14 6

Sintered Bronze Bushes type OB

Code Bore Ø
(mm)
Outside Ø D
(mm)
Length F
(mm)
Use with
OB4612 4 6 12 DS10
OB5812 5 8 12 DS10
OB5814 5 8 14 DS10
  • Intermediate sizes and
    special bushes to drawing
    (tooling charges may apply)
  • All dimensions in mm
  • Bore tolerance G7
  • OD tolerance s7
  • Length tolerance js13
665-banner-bottom

Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.For special or reworked gears please contact our Manufacturing Department for a quotation.