Transdev transback drawdown puller haul-off form fill seal belts

	't h e p o w e r t r a n s m i s s i o n e n g i n e e r s'
	HOME	ABOUT US	MULCO	SEARCH	PRICE LIST	UK DISTRIBUTORS

Draw-Down Belts
synchronous, draw-down vacuum belts for common
form-fill-seal machines



Technical Data
Belt	50 T10 / 920NG
Backing	Uracell VHD+
Back Thickness	2.5mm
No. Vacuum holes	92
Vacuum hole Ø	4.5mm



Properties
Continuous backing, no joint to delaminate No adhesive layer to be attacked and degraded by cleaning Can be run in in either direction no 'coiling' grooves to reduce vacuum Low elongation Long life - high resistance to tears/cuts

With a continuous backing, having no overlap joint, belts can run in either direction,

with no risk of delamination.

'The major cause of premature belt failure is unskilled staff running belts in the wrong direction after cleaning. Continuous backings stop this problem'