't h e p o w e r t r a n s m i s s i o n e n g i n e e r s'
|HOME||ABOUT US||MULCO||SEARCH||UK DISTRIBUTORS|
Precision Back, Edge, Face Grinding and Pocketing.
Transback can grind any face of a covered belt to precision tolerances. Belts up to 70 metres long and 600mm wide can be processed. Belts can be pocketed as required for component nesting.
Lengthways Precision Profiling
Precision Sectional Profiling
Backings can be cross-profiled or slotted. This can be for stress relief or providing profiles for high precision indexing or positioning.
Tooth Removal, Holes and Perforations
Tooth removal from timing belts is used for providing clearances for mechanically attached profiles or for use as a vacuum groove. Vacuum grooves can have Slip Face bonded to the belt face to reduce the coefficient of friction. Holes and perforations can be machined as required.