| The BRECO mechanical joint system gives the designer ever more versatility in the design and development of modular conveying systems. The BRECO mechanical joint comprises of a prepared, finger jointed belt to the required length, a number of tooth clamps and matching top plates and the screws to join the whole system together. The system can be used on ATN10 and ATN12.7 pitches and on belt widths from 50mm wide to 100mm wide. It is not currently available for self-tracking ATN belts with integral V-guides. All joint parts can be of food quality materials if necessary. Top plates can be replaced with normal full width ATN profiles wherever required. Please ask our technical department for details. |
Belt widths (mm) with available mechanical joints | Belt width | 50 | 75 | 100 | T10,
AT10,
ATN10, ATN10K6 | C
DC
DC-PRO | C
DC
DC-PRO | C
DC
DC-PRO | | ATN12.7, ATN12.7K6 | C
DC
DC-PRO | C
DC
DC-PRO | C
DC
DC-PRO | | ATN20 | DC
DC-PRO | DC
DC-PRO | DC
DC-PRO | | ATNS20 | DC
DC-PRO | DC
DC-PRO | - | |
|
Mechanical Joint Type 'C' Total thickness of belt = + 0.9 mm Belt teeth machined for connecting bars Joint length = 10 teeth = 9 pitches Back plates screw on the back of the belt Profiles cannot be mounted over the joint
| 
| 
|
Mechanical Joint Type 'DC' Belt teeth and back machined for connecting bars and back plates Joint length = 10 teeth = 9 pitches Back plates countersunk into the back of the belt Profiles cannot be mounted over the joint
|  |  |
Mechanical Joint Type 'DC-PRO' Belt teeth and back machined for connecting bars and back plates Joint length = 10 teeth = 9 pitches Back plates countersunk into the back of the belt Profiles can be mounted over the joint
| | 
|
| | |
