Brecoflex® Timing Belts SFAT20
Polyurethane, steel reinforced, extruded endless
self-tracking with staggered teeth |
| | Power Range | >200 kW | Heavy Construction M/c | | RPM Range | 0-6,500 rpm | Textile machinery | | Speed Range | 0-40 m/s | Pumps & compressors |
| | Available endless lengths for SFAT20 for preferred lengths refer to table over 1500mm belts lengths available in multiples of 1 tooth(1) over 20,000mm please enquire
Available versions for SFAT20 Please note :
For belts under 1500mm long
Not available
For belts over 1500mm long
Lengths in multiples of 1 tooth available(1)
Belts over 20000mm long on request
(1) minimum quantities may apply |
| 
| zmin = 18
dmin = 120
zmin = 25
dmin = 180 |
| Preferred belt width b [mm] | 50
| 75 | 100 | | Intermediate widths upon request |
| Tension member loadings
allowable tensile load by belt width Belt
width | b [mm] | 50 | 75 | 100 | Tension member loading | Ftadm [N] | 10000 | 15600 | 21200 | Belt weight | [kg/m] | 0.480 | 0.720 | 0.960 |
|
| 
| | Type | Length | No. Teeth | | SFAT20 | 1500 | 75 | | SFAT20 | 1600 | 80 | | SFAT20 | 1700 | 85 | | SFAT20 | 1800 | 90 | | SFAT20 | 1900 | 95 | | | | | | SFAT20 | 2000 | 100 | | SFAT20 | 2240 | 112 | | SFAT20 | 2500 | 125 | | SFAT20 | 2800 | 140 | | SFAT20 | 3000 | 150 | | | | | | SFAT20 | 3560 | 178 | | SFAT20 | 3760 | 188 | | SFAT20 | 4000 | 200 | | SFAT20 | 4500 | 225 | | SFAT20 | 5000 | 250 | | | | | | SFAT20 | 5600 | 280 | | SFAT20 | 6000 | 300 | | SFAT20 | 6700 | 335 | | SFAT20 | 7100 | 355 | | SFAT20 | 7500 | 375 |
SFAT20 maximum length
= 20000mm
|
|
|
