Contitech Synchrodrive N10 Powerstud belting, pulleys, guide rails and clamp plates

	't h e p o w e r t r a n s m i s s i o n e n g i n e e r s'
	HOME	ABOUT US	MULCO	SEARCH	PRICE LIST	UK DISTRIBUTORS

Contitech Synchrodrive N10^Ž
'a new concept in belting'

self tracking system - no flanges needed on pulleys
uni-directional - same meshing in any direction
polygon effect free - smooth rolling contact with pulleys
low noise and vibration - smooth meshing of studs into pockets
efficient packaging - available in steps of 10mm width
homogenous load distribution - thanks to symmetrical stud geometry and balanced load distribution in the S&Z wound tension members.

N10 Pulleys	N10 Clamp Plates		N10 Low Friction Guide Rails

Available types for N 10

single sided up to 100mm wide
open lengths (M)
joined belts from 1000mm (V)
nylon tooth facing (PAN)

nylon back facing (PAR)
nylon both sides (PAN/PAR)
high flexiblity version (HF)
anti-static, machined, ground and punched belts

Load on the stud flank of the Conti Synchrodrive N10

Speed n rpm	Fu spez N *
0	35.5
100	33.5
500	29.0
1000	25.7
1500	23.5
2000	21.9
3000	19.4
4000	17.6
5000	16.2
* per stud in mesh (max. 12) and per 10mm belt width

z_min = 16
d_min = 40

z_min = 16
d_min = 50

Tension member loadings
allowable tensile load by belt width

Belt width	b [mm]	20	40	60	80	100
N10 HF for linear drives	F_adm [N]	1360	2600	3900	5200	6500
N10 HF-V * for conveying drives	F_adm [N]	650	1300	1950	2600	3250
* Joined Belt

Copyright Š 2007 Transmission Developments Co (G.B.) Ltd