 | 't h e p o w e r t r a n s m i s s i o n e n g i n e e r s' | |||||
| HOME | ABOUT US | MULCO | SEARCH | UK DISTRIBUTORS | ||
| 't h e p o w e r t r a n s m i s s i o n e n g i n e e r s' | |||||
| HOME | ABOUT US | MULCO | SEARCH | UK DISTRIBUTORS | ||
DRIVELOCK® 50 BUSHES
 |  |  |
|
DRIVELOCK 50 | T | F Nm | P N/mm2 | Fa kN | ||
| d (mm) | D (mm) | L (mm) | ||||
| 6 | 9 | 4.5 | 2.4 | 0.84 | 75 | 3.8 |
| 7 | 10 | 4.5 | 3.0 | 0.86 | 70 | 3.9 |
| 8 | 11 | 4.5 | 4.7 | 1.17 | 90 | 5.3 |
| 9 | 12 | 4.5 | 7.9 | 1.76 | 105 | 15.6 |
| 10 | 13 | 4.5 | 9.5 | 1.91 | 105 | 15.6 |
| 12 | 15 | 4.5 | 11.4 | 1.91 | 90 | 15.6 |
| 13 | 16 | 4.5 | 13.1 | 2.02 | 90 | 15.6 |
| 14 | 18 | 6.3 | 22.3 | 3.18 | 90 | 25.4 |
| 15 | 19 | 6.3 | 24.3 | 3.24 | 85 | 25.4 |
| 16 | 20 | 6.3 | 27.3 | 3.42 | 85 | 25.4 |
| 17 | 21 | 6.3 | 29.8 | 3.51 | 85 | 25.4 |
| 18 | 22 | 6.3 | 32.4 | 3.61 | 80 | 25.4 |
| 19 | 24 | 6.3 | 49.0 | 5.22 | 110 | 36.0 |
| 20 | 25 | 6.3 | 53.0 | 5.33 | 105 | 36.0 |
| 22 | 26 | 6.3 | 66.0 | 6.00 | 115 | 36.0 |
| 24 | 28 | 6.3 | 73.0 | 6.13 | 110 | 36.0 |
| 25 | 30 | 6.3 | 72.0 | 5.77 | 95 | 36.0 |
| 28 | 32 | 6.3 | 86.0 | 6.33 | 100 | 36.0 |
| 30 | 35 | 6.3 | 91.0 | 6.08 | 85 | 36.0 |
| 32 | 36 | 6.3 | 131.0 | 8.24 | 115 | 45.0 |
| 35 | 40 | 7.0 | 171.0 | 9.77 | 110 | 54.0 |
| 36 | 42 | 7.0 | 169.0 | 9.39 | 100 | 54.0 |
| 38 | 44 | 7.0 | 181.0 | 9.55 | 95 | 54.0 |
| 40 | 45 | 8.0 | 231.0 | 11.57 | 105 | 66.0 |
| 42 | 48 | 8.0 | 235.0 | 11.22 | 95 | 66.0 |
| 45 | 52 | 10.0 | 353.0 | 15.71 | 95 | 99.0 |
| 48 | 55 | 10.0 | 572.0 | 23.44 | 135 | 132.0 |
| 50 | 57 | 10.0 | 602.0 | 24.08 | 130 | 132.0 |
| 55 | 62 | 10.0 | 670.0 | 24.35 | 125 | 132.0 |
| 56 | 64 | 12.0 | 790.0 | 28.20 | 115 | 157.2 |
| 60 | 68 | 12.0 | 860.0 | 28.60 | 110 | 157.2 |
DL50 consists of a pair of conical rings and can be used in series (up to 4 sets) to give higher torque ratings. Note : customer to supply clamping ring or equipment | ||||||
| Glossary | Machining Data | ||||
| Fa (kN) | Clamping Force | Recommended shaft & hub tolerances for full torque transmission are : | |||
| T (Nm) | Torque transmissible with tightening torque Ts | All shafts | h8 | All hubs | H8 |
| F (kN) | Force transmissible with tightening torque Ts | DL40 shaft DL50* shaft | h9 h6 | DL40 hub DL50* hub | H9 H7 |
P (N/mm2) | Hub/shaft surface pressure | * DL50 < 40mm diam. | |||