AT10 and ATL10 BRECO® Open Length (M)/Joined (V)

AT10 and ATL10 BRECO® Open Length (M) Joined (V)

Polyurethane, steel reinforced, extruded open length & joined – High Power AT Profile in metric pitch with trapezoidal tooth form.

AT10 Belt widths (mm) Intermediate belt widths on request
25 32 50 75 100 150
AT10 (M/V) Available lengths and versions
Standard delivery lengths (M) roll of 50 or 100m
Cut to lengths/lengths > 100m On request
Minimum length joined (V) b ≤ 100 480mm
b > 100 880mm
Standard material TPUST11)
Steel tension member x
E tension member o
Stainless Steel or Aramid member o
PAZ x
PAR x
PAZ-PAR x
DL/DL-PAZ
DR/DR-PAZ
T/T- PAZ bmax=100 o
ATL10 Belt widths (mm) Intermediate belt widths on request
32 50 75 100 150
ATL10 (M/V) Available lengths and versions
Standard delivery lengths (M) roll of 50 or 100m
Cut to lengths/lengths > 100m On request
Minimum length joined (V)
Standard material TPUST11)
Steel tension member x
E tension member
Stainless Steel or Aramid member o
PAZ x
PAR
PAZ-PAR
DL/DL-PAZ
DR/DR-PAZ
T/T- PAZ

x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request

AT 10- Allowable tensile load
Belt width b (mm) 25 32 50 75 100 150
Tension member loadings Fadm(N) M 4250 5500 8500 12750 17000 22000
V 2125 2750 4250 6375 8500 11000
Belt weight kg/m 0.158 0.186 0.290 0.436 0.581 0.839
ATL 10- Allowable tensile load
Belt width b (mm) 32 50 75 100 150
Tension member loadings Fadm(N) M 7200 11200 16800 22400 36000
Belt weight kg/m 0.220 0.340 0.510 0.680 1.020

Drive Type A

Type A AT10 AT10-T ATL10-DR
Zmin 15 25 25
dmin 50 80 80

Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)

Drive Type B

Type B AT10 AT10-T ATL10
Zmin 25 25 25
dmin 120 120 150