AT10 BRECOFLEX®

AT10 BRECOFLEX®

Polyurethane, Steel reinforced, extruded open length & joined – High Power AT Profile in metric pitch with trapezoidal tooth form.

Available endless lengths for AT10/AT10-DL

  • For preferred lengths refer to table
  • Belts under 1,080mm with PAZ nylon tooth facing
  • Under 1,080max. width is 100mm,
    further lengths upon request
  • Over 1,080mm belts lengths available in multiples of 1 tooth
  • Over 20,000mm please enquire
AT10 BFX Available lengths & versions
Standard lengths See table on the right
Minimum purchase amount up to 700mm 1 sleeve
Any number of teeth available from 720mm up to 30,000mm
under 1,500mm bmax= 100
Intermediate lengths from 720mm o
Standard Plus version 720mm up to 30,000mm
Over 22,000mm On request
Standard material up to 700mm TPUST3)
above 700mm TPUST12
Steel tension member (standard) x
E tension member o
Stainless Steel or Aramid tension member o
PAZ x
DL/DL-PAZ bmax= 100 from 900mm o3)
DR/DR-PAZ bmax= 100 from 900mm o
T/T-PAZ bmax= 100 from 1,080mm o

x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) 150mm belt width available from 1,500mm up to 15,000mm
2) Further materials on request
3) Only inner side can be coated

Drive Type A

Type A AT10 AT10-DL AT10-DR AT10-T AT10-E
Zmin 15 25 25 25 12
dmin 50 80 80 80 50

Drive Type B

Type B AT10 AT10-DL AT10-DR AT10-T AT10-E
Zmin 25 25 25 25 20
dmin 120 120 120 120 80

Zmin = Minimum number of teeth
dmin= Minimum diameter (mm)

Belt widths (mm) – Intermediate belt widths on request
25 32 50 75 100 150 1)
Standard lengths (mm)/Number of teeth
Length No. teeth Length No. teeth Length No. teeth
400 40 1010 101 3000 300
500 50 1080 108 3150 3150
530 53 1150 115 3350 335
560 56 1210 121 3550 355
610 61 1240 124 3750 375
630 63 1250 125 4000 400
660 66 1320 132 4250 425
700 70 1400 140 4500 450
720 72 1500 150 4750 475
780 78 1600 160 5000 500
800 80 1700 170 5300 530
810 81 1800 180 5600 560
840 84 1900 190 6000 600
850 85 2000 200 6300 630
880 88 2120 212 6700 670
890 89 2240 224 7100 710
920 92 2360 236 7500 750
960 96 2500 250 8000 800
970 97 2650 265 9000 900
980 98 2800 280
AT10 – Allowable tensile load and belt weight
Belt width b(mm) 25 32 50 75 100 150
Tension memberloadings 3500 4750 7750 12000 16000 24500
Belt weight AT-10 0.138 0.180 0.290 0.436 0.581 0.839
AT10-DL 0.184 0.233 0.375 0.566 0.755
AT10-DR 0.213 0.275 0.433 0.653 0.871
AT10-T 0.198 0.256 0.404 0.609 0.812