F2.2 Flat Belts BRECO® Open Length (M)/Joined (V)

F2.2 Flat Belts BRECO® Open Length (M)/Joined (V)

Polyurethane, Steel reinforced, extruded endless flat belting.

Properties for F2.2 BRECO® (M/V)

  • Low noise
  • Highly flexible
  • Wear resistant
  • Small build sizes
  • Hydrolysis resistant
  • Constant length
  • Resistant against simple oils, fats and petrol
  • Low elongation
  • Resistant to some acids
Belt widths b (mm) Intermediate belt widths on request
20 25 30 32 40 50 75 100
F2.2 (M/V) Available lengths and versions
Standard delivery lengths (M) Rolls of 50 or 100m
Cut/Lengths > 100m Length graduation from groove to groove (in 10mm stages) On request
Minimum length joined (V) 880
Standard material TPUST1)
Steel tension member (standard) x
E tension member o
VA tension member o
PAZ (groove side) x

Drive Type A

Without contra-flexure Steel tension member E tension member VA tension member
dmin 60 40 80

Drive Type B

With contra-flexure Steel tension member E tension member VA tension member
Zmin 120 70 130
dmin Sp 120 70 130

x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request

Allowable tensile load by belt width

BRECO/F2.2 (M/V) Tension cord strengths F/Belts weights
Belt width b (mm) 20 25 30 32 40 50 75 100
M E/Steel tension member F (N) 2500 3500 4500 5000 5500 7000 10000 14000
VA tension member F (N) 1875 2625 3375 3750 4125 5250 7500 10500
V E/Steel tension member F (N) 1250 1750 2250 2500 2750 3500 5000 7000
VA tension member F (N) 940 1315 1685 1875 2060 2625 3750 5250
Belt weight (kg/m) 0,071 0,092 0,120 0,130 0,146 0,213 0,309 0,366