F2 Flat Belts BRECOFLEX®

F2 Flat Belts BRECOFLEX®

Polyurethane, Steel reinforced, extruded endless flat belting.

Properties for F2 BRECOFLEX®

  • Low noise
  • Highly flexible
  • Wear resistant
  • Small build sizes
  • Hydrolysis resistant
  • Constant length
  • Resistant against simple oils, fats and petrol
  • Low elongation
  • Resistant to some acids

Allowable tensile load by belt width

BRECOFLEX F2 Tension cord strengths F/Belts weights
Belt width b (mm) 16 25 32 50 75 100
E/Steel tension member F (N) 1000 1800 2300 3800 5800 7800
VA tension member F (N) 800 1440 1840 3040 4640 6240
Belt weight (kg/m) 0,050 0,078 0,100 0,100 0,235 0,313

Drive Type A

Without contra-flexure Steel tension member E tension member VA tension member
dmin 30 25 60

Drive Type B

With contra-flexure Steel tension member E tension member VA tension member
Zmin 60 50 130
dmin Sp 60 50 130
Standard lengths (mm)
1500 1900
1550 1950
1600 2000
1650 2100
1700 2500
1750 3000
1800 4000
1850 5000
Belt widths (mm) Intermediate belt widths on request
16 25 32 50 75 100
BFX F2 Available lengths and versions
Standard delivery lengths (M) See table
Length graduation
from groove to groove
(in 10mm stages)
1,500mm up to 20,0000mm
Under 1,500mm On request
Intermediate Lengths o
Over 20,000mm On request
Standard material TPUST11)
Steel tension memeber(Standard) x
E tension member o
VA tension member o
PAZ (groove side) x

x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request