BRECO® Available Versions

BRECO® Available Versions

Standard version, single-sided
Version Standard

The standard version of the BRECO® and BRECOFLEX® timing belt is a combined construction of two materials: wear resistant polyurethane and high tensile steel cord tension members. The Standard Version is universally applicable for all tasks in drive and conveying technology.

  • Ordering code not required
Standard version, double-sided
Version DL

The standard version of the double-sided BRECO® and BRECOFLEX® timing belts is a combined construction of the two materials: wear resistant polyurethane and high tensile steel cord tension members. Full loadability on both tooth sides. The standard version of the DL timing belts are universal applicable for all tasks in the drive and conveying technology.

  • Ordering code: DL
Standard version with reinforced belt back
Version DR

The timing belt in version DR has in comparison with the standard version a thicker belt back.

  • Ordering code: DR
Standard version with transport coating
Version T

The timing belt in version T has in comparison with the standard version a transport coating, thickness 1.5mm (T5) resp. 2mm (T10, T20, AT10 AT20, Imperial timing belts), which is extruded on the belt back. The timing belt in version T is universal applicable for all tasks in the conveying technology.

  • Ordering code: version T
Nylon tooth facing
Version PAZ

The belt base corresponds to the Standard Version. An additional nylon tooth facing causes a lower friction coefficient, lightens the tooth mesh in the pulley and reduces noise. Transport belts on bed plates run easier and are wear resistant.

  • Ordering code: PAZ
Nylon facing on the back of the belt
Version PAR

The belt base corresponds to the Standard Version. An additional nylon tooth facing causes a lower friction coefficient. Application area in the conveying technology: e.g. for accumulation conveyor (back of the belt runs easier and is wear resistant).

  • Ordering code: PAR
  • Ordering code: PAZ-PAR (both sides coated)
Nylon facing on double-sided belts
Version DL-PAZ

The belt base corresponds to the double-sided Standard Version. An additional nylon tooth facing causes a lower friction coefficient, lightens the tooth mesh in the pulley and reduces noise. Transport belts on bed plates run easier and are wear resistant.

  • Ordering code: PAZ(coating only possible on inner side)