ATK10 K13 BRECO® Open Length (M)/Joined (V)

ATK10 K13 BRECO® Open Length (M)/Joined (V)

Polyurethane, Steel reinforced, extruded truly endless – High Power AT Profile in metric pitch with trapezoidal toothform, self-tracking.

BRECO® timing belts ATK10K13

  • Polyurethane, steel reinforced, open length
  • High Power AT Profile in metric pitch with trapezoidal toothform, self-tracking

Available types for ATK10K13

  • Single sided
  • Nylon tooth facing (PAZ)
  • Nylon back facing (PAR)
  • Nylon both facing (PAZ/PAR)
  • Transport backing (T) and (T-PAZ) up to 100mm wide
  • Special polyurethanes upon request
  • Antistatic, coloured, machined, ground and punched belts

Technical Specification

ATK10 K13– Allowable tensile load by belt width
Belt width b (mm) 32 50 75 100 150
Tension member loadings Fadm(N) M 4500 7500 10500 16000 22000
V 2250 3750 5250 8000 11000
Belt weight(kg/m) T 0.227 0.331 0.465 0.621 0.889
Belt widths (mm)
Intermediate belt widths on request
32 50 75 100 150
ATK10K13 (M/V) Available lengths and versions
Standard delivery lengths (M) Rolls of 50m
Cut to lengths/lengths > 100m on request
Minimum length joined (V) 880mm
Standard material TPUST1)
Steel tension member (standard) x
E tension member
Stainless Steel tension member o
PAZ x
PAR x
PAZ-PAR x
DL/DL-PAZ
DR/DR-PAZ
T/T- PAZ bmax=100 o

x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request

Drive Type A

Type A ATK10K13 ATK10K13-T
Zmin 20 25
dmin 60 80

Zmin = Minimum number of teeth.
dmin= Minimum diameter (mm)

Drive Type B

Type B ATK10K13 ATK10K13-T
Zmin 25 25
dmin 120 120