BAT15 BRECO® Open Length (M)/Joined (V)

BAT15 BRECO® Open Length (M)/Joined (V)

Polyurethane, Steel reinforced, extruded open length & joined, revolutionary curved tooth design, reduced noise, vibration and polygonal effect

BRECO® timing belts BAT15

  • Polyurethane, Steel reinforced, joined & open length belting
  • Revolutionary curved tooth design, reduced noise, vibration and polygonal effect

Available types for BAT15:

  • Single sided
  • Nylon tooth facing (PAZ)
  • Special polyurethanes upon request
  • Antistatic, coloured, machined, ground and punched belts

Drive Type A

Type A BAT15
Zmin 20 (25)
dmin 100 (120)

Drive Type B

Type B BAT15
Zmin 30 (35)
dmin 150 (180)

Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)

Values in brackets apply to jointed timing belts.

Belt widths (mm) Intermediate belt widths on request
50 75 100
BAT15 (M/V) Available lengths and versions
Standard delivery lengths (M) Rolls of 50 or 100m
Cut to lengths/lengths > 100m On request
Minimum length joined (V) 960mm
Standard material TPUST11)
Steel tension member (standard) x
E tension member
Stainless Steel tension member o

x   Available, standard lengths (see table) without minimum purchase
o   Minimum purchase amount on request
–   Not available
1)   Further materials on request

Technical Specification

BAT15 – Allowable tensile load by belt width
Belt width b (mm) 50 75 100
Tension member loadings Fadm(N) M 11200 16800 22400
V 5600 8400 11200
T2.5 Belt weight kg/m 0.428 0.643 0.856