TK10 K6 BRECOFLEX®

TK10 K6 BRECOFLEX®

Polyurethane, Steel reinforced, extruded truly endless, T Profile in metric pitch with trapezoidal toothform, self-tracking.

Available types for TK10K6

  • Single sided
  • Nylon tooth facing (PAZ)
  • Nylon back facing (PAR)
  • Nylon both facing (PAZ/PAR)
  • Transport backing (T) & (T-PAZ) up to 100mm wide
  • Special polyurethanes upon request
  • Antistatic, coloured, machined, ground and punched belts
Standard lengths (mm)/Number of teeth
Length No. teeth Length No. teeth Length No. teeth
1080 108 1750 175 4000 400
1150 115 1780 178 4250 425
1210 121 1880 188 4500 450
1240 124 1960 196 4750 475
1250 125 2250 225 5000 500
1320 132 2360 236 5300 530
1350 135 2500 250 5600 560
1390 139 2650 265 6000 600
1400 140 2800 280 6300 630
1420 142 3000 300 6700 670
1460 146 3100 310 7100 710
1500 150 3150 315 7500 750
1560 156 3350 335 8000 800
1610 161 3750 375 9000 900

Technical Specification

TK10 K6 – Allowable tensile load
Belt width b (mm) 50 100
Tension member loadings Fadm(N) 3800 7800
Belt weight kg/m 0.235 0.458
Belt widths (mm) Intermediate belt widths on request
50 100
TK10K6 BFX Available lengths & versions
Standard lengths See table on the left
Any number of teeth available from 720mm up to 22,000mm
Intermediate lengths from 720mm o
Standard Plus version 720mm up to 22,000mm
Over 22,000mm On request
Standard material TPUST11)
Steel tension member (standard) x
E tension member (standard) o
Stainless Steel or Aramid tension member o
PAZ From 1,080mm x
DL/DL-PAZ o
DR/DR-PAZ o
T/T-PAZ

x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request

Drive Type A

Type A TK10K6
Zmin 20
dmin 60

Drive Type B

Type B TK10K6
Zmin 25
dmin 80

Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)