WT10 Wide Open Length (M)/Joined (V)

WT10 Wide Open Length (M)/Joined (V)

143-1

Polyurethane, Steel reinforced, extruded endless, standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform.

143-2

Available types for WT10

  • Single-sided
  • Single sided with Aramid tension members
  • Nylon tooth facing (PAZ)
  • Special machining available upon request
Belt widths (mm) Intermediate belt widths on request
200 250 300 350 400 450
WT10 (M/V) Available lengths and versions
Standard delivery lengths (M) Rolls of 60m
Cut to lengths/lengths > 100m On request
Minimum length joined (V) Standard Standard 1000mm
Standard material PU 92 Shore A
Aramid tension member (standard) x
E tension member
Stainless Steel tension member
PAZ x
PAR x
PAZ-PAR x

x Available, minimum purchase amount
o Minimum purchase amount on request
– Not available
1) Further materials on request

WT10 – Tension member loadings
Belt width b (mm) 16 25 32 50 75 100 150
Tension member loadings F adm (N) M 1400 2200 2800 4400 6600 8800 13200
V 700 1100 1400 2200 3300 4400 6600
Wide Belt Specifications WT10
Pitch 10mm
Ultimate tensile strength per inch or 25mm belt width Aramid Ibf/in N/25mm 800 3557
Max. allowable belt tension per inch or 25mm belt width Aramid Welded Ibf/in N/25mm 71 315
Allowable effective tension for the belt teeth (15 & more teeth in mesh) Ibf/in N/25mm 281 1250
Specific belt weight Aramid Ibf/ft/in N/mm 0.066 0.039
Specific belt stiffness (open ended) Aramid Ibf/in N/mm 2383 4200
Min. number of pulley teeth 16
Min. pitch diameter (mm) 51mm
Min. diameter of tensioning idler running on back of belt inch mm 3 1/2 80
Available in FDA compliant construction (85 shore A Urethane) Yes
Standard colour Natural
Min. welded belt length 850mm
Standard roll length 60m
Standard slitting lanes N/A
Min. width available 150mm
Max. width available 450mm
Width tolerance +/- 1.0mm
Service temperature range -5°C to 70°C ( 23°F to 158°F)
Hardness, Shore A 92 Shore A – Standard PU, 85 Shore A – FDA compliant PU
Coefficient of friction Urethane vs. Steel (dry) 0.5 to 0.7 Urethane vs. Aluminium (dry) 0.5 to 0.6 Urethane vs. UHMWPE (dry) 0.5 to 0.4