T1/5 (XL) BRECO® Open Length (M) / Joined (v)

T1/5″ (XL) BRECO® Open Length (M)/Joined (V)

Polyurethane, steel reinforced, extruded open length & joined. Classic imperial pitch with trapezoidal toothform.

BRECO® timing belts T1/5″ (XL)

  • Polyurethane, Steel reinforced, joined & open length belting
  • Classic imperial pitch with trapezoidial toothform

Available types for T5-M

  • Single-sided
  • Single sided with E tension members
  • Special polyurethanes upon request
  • Nylon tooth facing (PAZ)
  • Antistatic, coloured, machined, ground and punched belts
  • Clamp plates and end connections

Drive Type A

Type A T1/5 (XL)
Zmin 10 (25)
dmin 30 (60)

Drive Type B

Type B T1/5 (XL)
Zmin 15 (25)
dmin 30 (60)

Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)

Values in brackets apply to jointed timing belts.

Preferred belt widths b (mm) Intermediate and larger width upon request
6.35 7.94 9.53 12.7 19.1 25.4
1/4″ 5/16″ 3/8″ 1/2″ 3/4″ 1″
T1/5″ (MV) Available lengths and versions
Standard delivery lengths (M) Rolls of 50 or 100m
Cut to lengths/lengths > 100m On request
Minimum length joined (V) bmin=7,94 460mm
Standard material TPUST1)
Steel tension member (standard) x
E tension member
Stainless Steel tension member
PAZ x
PAR x
PAZ-PAR x
DL/DL-PAZ
DR/DR-PAZ
T/T- PAZ

x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request

Technical Specification

T1/5″ (XL) – Allowable tensile load by belt width
Belt width b(mm) 9.53 12.7 19.1 25.4
Tension member loadings M 330 390 660 840
V 165 195 330 420
Belt weight kg/m 0.023 0.030 0.046 0.061