T1/2 (H) BRECOFLEX®

T1/2 (H) BRECOFLEX®

Polyurethane, Steel reinforced, extruded truly endless. Classic imperial pitch with trapezoidal toothform.

Available types for T1/2″ (H)

  • Single Sided
  • Nylon tooth facing (PAZ)
  • Special Polyurethanes upon request
  • Antistatic, coloured, machined, ground and punched belts
Standard lengths (mm)/Number of teeth
Type No. teeth Length
420 H 1066,80 84
450 H 1143,00 90
480 H 1219,20 96
510 H 1295,40 102
540 H 1371,60 108
570 H 1447,80 114
600 H 1524,00 120
630 H 1600.20 126
660 H 1676.40 140
750 H 1905.00 150
800 H 2032.00 160
Type Length No. teeth
850 H 2159.00 170
900 H 2286.00 180
1000 H 2540.00 200
1100 H 2794.00 220
1250 H 3175.00 250
1400 H 3556.00 280
1700 H 4318.00 340
2000 H 5080.00 400
2300 H 6604.00 520
3000H 7620.00 600

x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request

Technical Specification

T1/2″ – Allowable tensile load by belt width
Belt width b (mm) 12.7 19.1 25.4 38.1 50.8 76.2 101.6
Tension member loadings Fadm(N) 800 1300 1800 2800 3800 5800 7900
Belt weight (kg/m) H 0.053 0.079 0.108 0.161 0.216 0.324 0.432
H-DL 0.064 0.097 0.130 0.161 0.262 0.394 0.527
H-DR 0.085 0.128 0.171 0.258 0.345 0.518 0.692
H-T 0.082 0.124 0.165 0.249 0.333 0.499 0.668
Preferred Belt widths b (mm) Intermediate and larger width upon request
12.7 19.1 25.4 38.1 50.8 76.2 101.6
1/2″ 3/4″ 1″ 1.5″ 2″ 3″ 4″
T1/2″H BFX Available lengths & versions
Standard Stock lengths See table on the left
Any number of teeth available from 723.9mm up to 16,002mm
Intermediate lengths from 723.9mm o
Standard Plus version 723.9mm up to 16,002mm
Over 16,002mm On request
Standard material from 723.9mm TPUST11)
Steel tension member
(standard)
x
E tension member
Stainless Steel
tension member
PAZ x
DL/DL-PAZ from 901.7mm o
DR/DR-PAZ from 901.7mm o
T/T-PAZ o

Drive Type A

Type A T1/2 (H) DL DR T
Zmin 20 20 20 20
dmin 60 60 80 80

Drive Type B

Type B T1/2 (H) DL DR T
Zmin 20 20 20 20
dmin 80 80 80 80

Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)