Transback Backed Belts

Materials

Material Backed belts – Description Abrasion
Resist
Coefficient
of friction
Temp
Range
Stress
Rating
This 95% natural rubber is the most common and versatile
backing material with outstanding resilience and remarkable
cut and tear resistance. Excellent wet abrasion resistance.
5 0.7 +70°C
– 40°C
MSM
Silica reinforced natural and synthetic rubber mix, resilience
for severe abrasion resistance. Low compression set and high elasticity.
6 0.7 +70°C
– 40°C
HSM
Low coefficient of friction, highly wear resistant
polymer fabric facing. For use on belts which are used as
accumulators or for BRECOFLEX® PAR options.
2 0.2 +80°C
– 30°C
HSM
Oil, heat and aromatic hydrocarbon resistant solid rubber for
heavy duty traction and haul-off applications.
5 0.5 +80°C
– 20°C
HSM
Yellow solid polyester Vulkollan® polyurethane with
excellent wear and abrasion resistance. High co-efficient of friction
for haul-off or Form-Fill Sealing applications.
8 0.4 +80°C
– 50°C
HSM
Solid polyester Vulkollan® polyurethane with oil, wear
and abrasion resistance. Excellent for pocketing, nesting and
profiling for precision indexing belts.
9 0.3 +80°C
– 50°C
HSM
Solid polyester Vulkollan® polyurethane, excellent for machining
of pockets and profiles. Extremely wear resistant.
10 0.2 +80°C
– 50°C
HSM
White nitrile rubber suitable for most food and medical
use including fatty foods. Approved materials to FDA 177.2600.
Good heat ageing resistance.
4 0.7 +70°C
– 30°C
HSM
Filled natural rubber excellent for profiling and grooving. High tear
and abrasion resistance. High resilience and elasticity.
5 0.9 +70°C
– 50°C
MSM
Silicon rubber with good release, wear, abrasion
and temperature resistance (+200°C) properties.
Non-toxic food and medical quality to FDA 177.2600.
7 0.4 +200°C
– 30°C
HSM
Closed cell Polychloroprene sponge. Good ageing, oil compression
and chemical resistance and non-liquid absorbent.
Non flammable and self extinguishing.
2 0.9 +70°C
– 30°C
LSM
Higher density NeoCell. Good compression, ageing, oil
and chemical resistance and non-liquid absorbent.
Non flammable and self-extinguishing.
5 0.6 +70°C
– 30°C
MSM
Heavy duty natural and synthetic rubber mix for superior
strength and resilience for severe abrasion resistance.
Low compression set and high elasticity.
7 0.4 +70°C
– 30°C
HSM
PVC special profile with good resilience and
high wear resistance. Oil and fat resistant and especially
suitable for snack food conveying applications.
5 0.8 +80°C
– 20°C
MSM
Smooth PVC with exceptional grip and high wear resistance. Well suited to
conveying products with a smooth surface without slip.
5 0.9 +80°C
– 20°C
MSM
Low density sponge open cell natural rubber for excellent resilience. High elasticity and porosity. 1 0.7 +60°C
– 30°C
XLSM
Polyurethane foamed elastomer with micro
cellular construction. Excellent wear resistance.
1 0.6 +90°C
– 20°C
LSM
Low density partially closed cell elastomer for conveying delicate items.
Good oil, grease, solvent and general chemical resistance.
1 0.6 +80°C
– 20°C
LSM
Medium density partially closed cell elastomer for conveying delicate items. Good oil, grease, solvent and general chemical resistance. 1 0.5 +80°C
– 20°C
LSM
High density mainly closed cell elastomer for conveying and transport. Good oil, grease, solvent and general chemical resistance. 1 0.5 +80°C
– 20°C
MSM
Very high density fully closed cell elastomer for conveying delicate items. Good oil, grease, solvent and general chemical resistance. High wear resistance. 5 0.3 +80°C
– 30°C
MSM