T10 BRECOFLEX®

T10 BRECOFLEX®

Polyurethane, steel reinforced, extruded truly endless, standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform.

Available types for T10

  • Single-sided
  • Single-sided with E tension members
  • Special polyurethanes upon request
  • Nylon tooth facing (PAZ)
  • Antistatic, coloured,machined, ground and punched belts
  • Clamp plates and end connections
Standard lengths (mm)/Number of teeth
Length No. teeth
500 50
530 53
560 56
600 60
610 61
630 63
660 66
690 69
700 70
720 72
780 78
810 81
840 84
880 88
890 89
920 92
960 96
Length No. teeth
970 97
980 98
990 99
1010 101
1080 108
1150 115
1210 121
1240 124
1250 125
1320 132
1350 135
1390 139
1400 140
1420 142
1460 146
1500 150
1560 156
Length No. teeth
1610 161
1750 175
1780 178
1880 188
1960 196
2250 225
2360 236
2500 250
2650 265
2800 280
3000 300
3100 310
3150 315
3350 335
3750 375
4000 400
4250 425
Length No. teeth
4500 450
4750 475
5000 500
5300 530
5600 560
6000 600
6300 630
6700 670
7100 710
7500 750
8000 800
9000 900
Belt widths (mm)
Intermediate belt widths on request
16 25 32 50
T10 BFX Available lengths & versions
Standard lengths See table on the right
Minimum purchase amount up to 700mm 1 sleeve
Any number of teeth available from 720mm up to 22,000mm
Intermediate lengths from 720mm o
Standard Plus version 720mm up to 22,000mm
Over 22,000mm On request
Standard material up to 700mm TPUST3
from 720mm TPUST11)
Steel tension member (standard) x
E tension member (standard) o
Stainless Steel or Aramid tension member o
PAZ x
DL/DL-PAZ from 900mm o
DR/DR-PAZ from 900mm o
T/T-PAZ

x   Available, standard lengths (see table) without minimum purchase

o   Minimum purchase amount on request

–   Not available

1)   Further materials on request

Technical Specification

T10 – Allowable tensile load by belt width
Belt width b (mm) 16 25 32 50 75 100
Tension member
loadings
Fadm(N) 1000 1800 2300 3800 5800 7800
Belt weight kg/m 0.068 0.114 0.145 0.227 0.341 0.454
kg/m 0.090 0.143 0.183 0.228 0.432 0.577
kg/m 0.119 0.185 0.237 0.372 0.558 0.795
kg/m 0.107 0.170 0.217 0.342 0.513 0.685

Drive Type A

Type A T10 DL DR T
Zmin
12
20
20
20
dmin
60
60
60
60

Drive Type B

Type B T10 DL DR T
Zmin
20
20
20
20
dmin
60
60
80
80

Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)