T10 BRECOFLEX®

T10 BRECOFLEX®

Polyurethane, steel reinforced, extruded truly endless, standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform.

Available types for T10

  • Single-sided
  • Single-sided with E tension members
  • Special polyurethanes upon request
  • Nylon tooth facing (PAZ)
  • Antistatic, coloured,machined, ground and punched belts
  • Clamp plates and end connections
Standard lengths (mm)/Number of teeth
Length No. teeth Length No. teeth Length No. teeth Length No. teeth
500 50 970 97 1610 161 4500 450
530 53 980 98 1750 175 4750 475
560 56 990 99 1780 178 5000 500
600 60 1010 101 1880 188 5300 530
610 61 1080 108 1960 196 5600 560
630 63 1150 115 2250 225 6000 600
660 66 1210 121 2360 236 6300 630
690 69 1240 124 2500 250 6700 670
700 70 1250 125 2650 265 7100 710
720 72 1320 132 2800 280 7500 750
780 78 1350 135 3000 300 8000 800
810 81 1390 139 3100 310 9000 900
840 84 1400 140 3150 315
880 88 1420 142 3350 335
890 89 1460 146 3750 375
920 92 1500 150 4000 400
960 96 1560 156 4250 425

Technical Specification

T10 – Allowable tensile load by belt width
Belt width b (mm) 16 25 32 50 75 100
Tension member loadings Fadm(N) 1000 1800 2300 3800 5800 7800
Belt weight kg/m 0.068 0.114 0.145 0.227 0.341 0.454
kg/m 0.090 0.143 0.183 0.228 0.432 0.577
kg/m 0.119 0.185 0.237 0.372 0.558 0.795
kg/m 0.107 0.170 0.217 0.342 0.513 0.685
Belt widths (mm) Intermediate belt widths on request
16 25 32 50
T10 BFX Available lengths & versions
Standard lengths See table on the right
Minimum purchase amount up to 700mm 1 sleeve
Any number of teeth available from 720mm up to 22,000mm
Intermediate lengths from 720mm o
Standard Plus version 720mm up to 22,000mm
Over 22,000mm On request
Standard material up to 700mm TPUST3
from 720mm TPUST11)
Steel tension member (standard) x
E tension member (standard) o
Stainless Steel or Aramid tension member o
PAZ x
DL/DL-PAZ from 900mm o
DR/DR-PAZ from 900mm o
T/T-PAZ

x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request

Drive Type A

Type A T10 DL DR T
Zmin 12 20 20 20
dmin 60 60 60 60

Drive Type B

Type B T10 DL DR T
Zmin 20 20 20 20
dmin 60 60 80 80

Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)