T5 BRECOFLEX®

Brecoflex® T5

Polyurethane, steel reinforced, extruded truly endless, standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform.

Available endless lengths for T5

  • For preferred lengths refer to table
  • Under 1,075mm further lengths on request
  • Belts under 1,075mm with PAZ nylon tooth facing
  • Over 1,075mm belts lengths available in multiples of 1 tooth
  • Over 15,000mm please enquire
T5 BFX Available lengths & versions
Standard lengths See table on the right
Minimum purchase amount up to 690mm 1 sleeve
Any number of teeth available from 720mm up to 15,000mm
Intermediate lengths from 720mm o
Standard Plus version 720mm up to 15,000mm
Over 15,000mm On request
Standard material up to 690mm TPUST3
from 720mm TPUST11)
Steel tension member (standard) x
E tension member (standard) o
Stainless Steel or Aramid tension member o
PAZ x
DL/DL-PAZ from 900mm o
DR/DR-PAZ from 900mm o
T/T-PAZ o

x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request

Technical Specification

T5 – Allowable tensile load by belt width
Belt width b (mm) 10 16 25 32 50
Tension member loadings Fadm(N) 330 570 930 1200 1920
Belt weight (kg/m) T5 0.022 0.034 0.052 0.067 0.105
T5-DL 0.028 0.045 0.072 0.099 0.141
T5-DR 0.036 0.057 0.090 0.115 0.180
Standard lengths (mm)/Number of teeth
Length No. teeth Length No. teeth Length No. teeth
200 40 560 112 1800 360
215 43 575 115 1900 380
220 44 610 122 2000 400
225 45 620 124 2120 424
240 48 630 126 2240 448
245 49 660 132 2360 472
255 51 690 138 2500 500
260 52 720 144 2650 530
270 54 750 150 2800 560
280 56 755 151 3000 600
295 59 780 156 3150 630
305 61 800 160 3350 670
330 66 815 163 3550 710
340 68 840 168 3750 750
355 71 850 170 4000 800
365 73 860 172 4250 850
370 74 900 180 4500 900
390 78 945 189 4750 950
400 80 990 198 5000 1000
410 82 1040 208 5300 1060
420 84 1075 215 5600 1120
435 87 1100 220 6000 1200
455 91 1215 243 6300 1260
480 96 1380 276 6700 1340
500 100 1400 280 7100 1420
510 102 1500 300 7500 1500
525 105 1600 320
545 109 1700 340

Preferred belt width b (mm) 6,10,16,25,32,50 – other dimensions upon request

Drive Type A

Type A T5 T5-DR
Zmin 10 20
dmin 30 30

Drive Type B

Type B T5 T5-DR
Zmin 15 20
dmin 30 60

Zmin = Minimum number of teeth / dmin= Minimum diameter (mm)