Metric Racks in Steel, Continuous Mounting 1.0 – 8.0 MOD, 20° P.A
- Can be induction or flame hardened Intermediate sizes and special racks to drawing
- Standards: to DIN 867, 3962, 3963, Grade/Quality 9 or equivalent
- Standard tolerances, unless otherwise stated ±0.25mm
- All dimensions in mm
- Steel EN8, (080M40, 080M46, 212A42), normalised or equivalent
Code | Pitch Module | Width B | Height A | Height to Pitch Line hp | No. of Teeth | Length L |
---|---|---|---|---|---|---|
SR10/15/1C | 1 | 15 | 15 | 14 | 318 | 999.02 |
SR10/15/2C | 1 | 15 | 15 | 14 | 636 | 1998.05 |
SR10/15/3C | 1 | 15 | 15 | 14 | 955 | 3002.22 |
SR15/17/1C | 1.5 | 17 | 17 | 15.5 | 212 | 999.02 |
SR15/17/2C | 1.5 | 17 | 17 | 15.5 | 424 | 1998.05 |
SR15/17/3C | 1.5 | 17 | 17 | 15.5 | 637 | 3001.79 |
SR20/20/1C | 2 | 20 | 20 | 18 | 159 | 999.02 |
SR20/20/2C | 2 | 20 | 20 | 18 | 318 | 1998.05 |
SR20/20/3C | 2 | 20 | 20 | 18 | 478 | 3003.36 |
SR25/25/1C | 2.5 | 25 | 25 | 22.5 | 127 | 997.45 |
SR25/25/2C | 2.5 | 25 | 25 | 22.5 | 255 | 2002.77 |
SR25/25/3C | 2.5 | 25 | 25 | 22.5 | 382 | 3000.22 |
SR30/30/1C | 3 | 30 | 30 | 27 | 106 | 999.02 |
SR30/30/2C | 3 | 30 | 30 | 27 | 212 | 1998.05 |
SR30/30/3C | 3 | 30 | 30 | 27 | 319 | 3006.5 |
SR40/40/1C | 4 | 40 | 40 | 36 | 80 | 1005.31 |
SR40/40/2C | 4 | 40 | 40 | 36 | 159 | 1998.05 |
SR40/40/3C | 4 | 40 | 40 | 36 | 239 | 3003.36 |
SR40/50/2C | 4 | 50 | 50 | 46 | 159 | 1998.05 |
SR50/50/1C | 5 | 50 | 50 | 45 | 64 | 1005.31 |
SR50/50/2C | 5 | 50 | 50 | 45 | 128 | 2010.62 |
SR50/50/3C | 5 | 50 | 50 | 45 | 191 | 3000.22 |
SR60/60/1C | 6 | 60 | 60 | 54 | 53 | 999.02 |
SR60/60/2C | 6 | 60 | 60 | 54 | 106 | 1998.05 |
SR80/80/1C | 8 | 80 | 80 | 72 | 40 | 1005.3 |
SR80/80/2C | 8 | 80 | 80 | 72 | 80 | 2010.62 |
Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.
For special or reworked racks please contact our Manufacturing Department for a quotation.