DRIVELOCK® 16 Bushes

• Self-centering
• High torques 264 to 37000 Nm
• Bores 18 to 180mm
• Imperial bore also available*

Machining data
Recommended shaft & hub tolerances for full torque transmission are:
Shafts	h8	Hub	H8

Stock no.	d (h8) (mm)	D (mm)	D₁ (mm)	M (screws)	L (mm)	B (mm)	A (mm)	T_s (Nm)	T(Nm)	F (kN)	p (N/mm²⁾
DL16/ 18	18	47	56	M6	34	28	22	17	264	27	93
DL16/ 19	19	47	56	M6	34	28	22	17	274	27	93
DL16/ 20	20	47	56	M6	34	28	22	17	284	29	93
DL16/ 22	22	47	56	M6	34	28	22	17	314	29	93
DL16/ 24	24	50	59	M6	34	28	22	17	401	29	107
DL16/ 25	25	50	59	M6	34	28	22	17	441	35	107
DL16/ 28	28	55	64	M6	34	28	22	17	490	35	98
DL16/ 30	30	55	64	M6	34	28	22	17	529	35	98
DL16/ 32	32	60	69	M6	34	28	22	17	755	47	112
DL16/ 35	35	60	69	M6	34	28	22	17	824	47	107
DL16/ 38	38	65	74	M6	34	28	22	17	892	47	112
DL16/ 40	40	65	74	M6	34	28	22	17	941	47	102
DL16/42	42	75	84	M8	41	33	25	41	1599	75	132
DL16/ 45	45	75	84	M8	41	33	25	41	1716	75	132
DL16/ 50	50	80	89	M8	41	33	25	41	1893	75	127
DL16/ 55	55	85	94	M8	41	33	25	41	2403	86	132
DL16/ 60	60	90	99	M8	41	33	25	41	2648	86	122
DL16/ 65	65	95	104	M8	41	33	25	41	3188	98	132
DL16/ 70	70	110	119	M10	50	40	30	83	4905	138	127
DL16/ 75	75	115	124	M10	50	40	30	83	5150	138	122
DL16/ 80	80	120	129	M10	50	40	30	83	5490	138	132
DL16/ 85	85	125	134	M10	50	40	30	83	6620	155	127
DL16/ 90	90	130	139	M10	50	40	30	83	6960	155	137
DL16/ 95	95	135	144	M10	50	40	30	83	8190	172	145
DL16/ 100	100	145	154	M12	56	44	32	145	10100	201	135
DL16/ 110	110	155	164	M12	56	44	32	145	11030	201	142
DL16/ 120	120	165	174	M12	56	44	32	145	13600	226	137
DL16/ 130	130	180	189	M12	64	52	40	145	19000	302	127
DL16/ 140	140	190	199	M14	68	54	40	230	21800	310	137
DL16/ 150	150	200	209	M14	68	54	40	230	25600	345	140
DL16/ 160	160	210	219	M14	68	54	40	230	30200	379	140
DL16/ 170	170	225	234	M14	78	64	50	230	35000	412	110
DL16/ 180	180	235	244	M14	78	64	50	230	37000	412	108

*NB: Imperial bore Drivelocks can be manufactured, please enquire!

(1 votes, average: 5.00 out of 5)

Signup