Transback Bonded Belt Backings
Material | Backed belts – Description | Abrasion Resist | Coefficient of friction | Temp Range | Stress Rating |
---|---|---|---|---|---|
AbbrX-55 |
Silica reinforced natural and synthetic rubber mix, resilience for severe abrasion resistance. Low compression set and high elasticity. | 6 | 0.7 | +70°C- 40°C | HSM |
NKR-38 | This 95% natural rubber is the most common and versatile backing material with outstanding resilience and remarkable cut and tear resistance. Excellent wet abrasion resistance. | 5 | 0.7 | +70°C- 40°C | MSM |
Slipface |
Low coefficient of friction, highly wear resistant polymer fabric facing. For use on belts which are used as accumulators or for BRECOFLEX® PAR options. | 2 | 0.2 | +80°C- 30°C | HSM |
Nitrisol-55 |
Oil, heat and aromatic hydrocarbon resistant solid rubber for heavy duty traction and haul-off applications. | 5 | 0.5 | +80°C- 20°C | HSM |
Urasol-60 |
Yellow solid polyester Vulkollan® polyurethane with excellent wear and abrasion resistance. High co-efficient of friction for haul-off or Form-Fill Sealing applications. | 8 | 0.4 | +80°C- 50°C | HSM |
Urasol-70 |
Solid polyester Vulkollan® polyurethane with oil, wear and abrasion resistance. Excellent for pocketing, nesting and profiling for precision indexing belts. | 9 | 0.3 | +80°C- 50°C | HSM |
Urasol-80 |
Solid polyester Vulkollan® polyurethane, excellent for machining of pockets and profiles. Extremely wear resistant. | 10 | 0.2 | +80°C- 50°C | HSM |
FoodX-40 |
White nitrile rubber suitable for most food and medical use including fatty foods. Approved materials to FDA 177.2600. Good heat ageing resistance. | 4 | 0.7 | +70°C- 30°C | HSM |
FoodX-60 |
White nitrile rubber suitable for most food and medical use including fatty foods. Approved materials to FDA 177.2600. Good heat ageing resistance. | 4 | 0.7 | +70°C- 30°C | HSM |
CorrX-40 |
Filled natural rubber excellent for profiling and grooving. High tear and abrasion resistance. High resilience and elasticity. | 5 | 0.9 | +70°C- 50°C | MSM |
NeoCell |
Closed cell Polychloroprene sponge. Good ageing, oil compression and chemical resistance and non-liquid absorbent. Non flammable and self extinguishing. | 2 | 0.9 | +70°C- 30°C | LSM |
NeoCell-Plus |
Higher density NeoCell. Good compression, ageing, oil and chemical resistance and non-liquid absorbent. Non-flammable and self-extinguishing. | 5 | 0.6 | +70°C- 30°C | MSM |
AbbrX-HD70 |
Heavy duty natural and synthetic rubber mix for superior strength and resilience for severe abrasion resistance. Low compression set and high elasticity. | 7 | 0.4 | +70°C- 30°C | HSM |
Supergrip |
PVC special profile with good resilience and high wear resistance. Oil and fat resistant and especially suitable for snack food conveying applications. | 5 | 0.8 | +80°C- 20°C | MSM |
PVC BLUE |
Smooth PVC with exceptional grip and high wear resistance. Well suited to conveying products with a smooth surface without slip. | 5 | 0.9 | +80°C- 20°C | MSM |
FoamX-LD |
Low density sponge open cell natural rubber
for excellent resilience. High elasticity and porosity.
|
1 | 0.7 |
+60°C– 30°C
|
XLSM
|
UraFoam-35 |
Polyurethane foamed elastomer with micro
cellular construction. Excellent wear resistance.
|
1 | 0.6 |
+90°C– 20°C
|
LSM
|
UraCell-LD |
Low density partially closed cell elastomer for conveying delicate items. Good oil, grease, solvent and general chemical resistance.
|
1 | 0.6 |
+80°C– 20°C
|
LSM |
UraCell-MD |
Medium density partially closed cell elastomer for
conveying delicate items. Good oil, grease, solvent
and general chemical resistance.
|
1 | 0.5 |
+80°C– 20°C
|
LSM
|
UraCell-HD |
High density mainly closed cell elastomer for conveying and transport. Good oil, grease, solvent and general chemical resistance.
|
1 | 0.5 |
+80°C– 20°C
|
MSM |
UraCell-VHD |
Very high density fully closed cell elastomer for conveying
delicate items. Good oil, grease, solvent and general
chemical resistance. High wear resistance.
|
5 | 0.3 |
+80°C– 30°C
|
MSM |