T10 & T10-DL CONTI SYNCHROFLEX®
Polyurethane, steel reinforced, cast truly endless, standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform.
Available versions:
- Single-sided
- Available with E tension members for increased flexibility
- Available with Aramid tension members
- Special polyurethanes upon request
- Antistatic, coloured, machined, ground and punched belts
- Backings
Technical Specification
| T10 – Allowable tensile load by belt width | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Belt width | b (mm) | 16 | 25 | 32 | 50 | 100 | |||
| Tension member loadings |
Fadm(N) | 1200 | 2000 | 2700 | 4300 | 8800 | |||
| Belt weight (kg/m) |
T10 | 0.077 | 0.120 | 0154 | 0.240 | 0.480 | |||
| T10-DL | 0.092 | 0.143 | 0.183 | 0.285 | 0.570 | ||||
| Standard stock lengths (mm)/Number of teeth |
|---|
| Length | No. teeth | Stocklength | Length | No. teeth | Stocklength | Length | No. teeth | Stocklength | Length | No. teeth | Stocklength |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 260 | 26 |  |
690 | 69 | |
980 DL | 98 | |
1400 | 140 | |
| 260DL | 26 | |
700 | 70 | |
1010 | 101 | |
1420 | 142 | |
| 350 | 35 | |
720 | 72 | |
1080 | 108 | |
1420 DL | 142 | |
| 370 | 37 | |
720 DL | 72 | |
1110 | 111 | |
1450 | 145 | |
| 400 | 40 | |
730 | 73 | |
1140 | 114 | |
1460 | 146 | |
| 410 | 41 | |
750 | 75 | |
1150 | 115 | |
1500 | 150 | |
| 420 | 42 | |
760 | 76 | |
1210 | 121 | |
1560 | 156 | |
| 440 | 44 | |
780 | 78 | |
1210 DL | 121 | |
1610 | 161 | |
| 450 | 45 | |
810 | 81 | |
1240 | 124 | |
1610 DL | 161 | |
| 500 | 50 | |
840 | 84 | |
1240 DL | 124 | |
1750 | 175 | |
| 530 | 53 | |
840 DL | 84 | |
1250 | 125 | |
1780 | 178 | |
| 530 DL | 53 | |
850 | 85 | |
1250 DL | 1250 | |
1880 | 188 | |
| 560 | 56 | |
880 | 88 | |
1300 | 130 | |
1880 DL | 188 | |
| 600 | 60 | |
890 | 89 | |
1320 | 132 | |
1960 | 196 | |
| 610 | 61 | |
920 | 92 | |
1320 DL | 132 | |
2250 | 225 | |
| 630 | 63 | |
960 | 96 | |
1350 | 135 | |
3100 | 310 | |
| 630 DL | 63 | |
970 | 97 | |
1350 DL | 135 | |
4780 | 478 | |
| 660 | 66 | |
980 | 98 | |
1390 | 139 | |
4780 DL** | 478 | |
| 660 DL | 66 | |
|||||||||
| 680 | 68 | |
Preferred belt width in mm: 16, 25, 32, 50 – other dimensions upon request. DL: double sided **Please request technical support.
Drive Type A
| Type A | T10 |  |
|---|---|---|
| Zmin | 12 | |
| dmin | 16 |
Drive Type B
| Type B | T10 |  |
|---|---|---|
| Zmin | 20 | |
| dmin | 60 |
Zmin = Minimum number of teeth. dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...