Volta V Belts
V section from 80-100 Shore ‘A’. FDA/USDA grades availability.
| V Belts 1 – Sizes & Properties | ||||||
|---|---|---|---|---|---|---|
| VL /VLC | VLB | VLW | VPZ | VPZS | VPF | |
 |
 |
 |
 |
 |
 |
|
| Hardness | 80 A | 80A | 80 A | 86 A / 35 D | 86 A / 35 D | 88 A / 37 D |
| USDA/FDA | Yes | Yes | Yes | No | No | Yes |
| Coeff. friction (Steel) | 0.55 | 0.55 | 0.55 | 0.4 | 0.4 | 0.38 |
| Temp. range | -40/+55°C | -40°C to 55°C | -40/+55°C | -20/+50°C | -20/+50°C | -30/+60°C |
| Size W x H (mm) | Min. pulley dia. (mm) |
Pull force (1%) kg. |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
Min. pulley dia. (mm) |
Pull force (0.5%) kg. |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6Y = 6 x 4* | 25 | 0.30 | – | – | – | – | – | – | – | – | – | – |
| 8/M = 8 x 5.2* |
40 | 0.7 | 40 | 0.7 | – | – | – | – | – | – | – | – |
| 10/Z = 10 x 6.5 |
45 | 1 | 45 | 1 | – | – | – | – | – | – | 60 | 2.7 |
| 13/A = 13 x 8 |
50 | 1.6 | 50 | 1.6 | 50 | 12 | 72 | 3.3 | 88 | 26 | 76 | 3.5 |
| 17/B = 17 x 11.5 |
75 | 2.9 | 75 | 2.9 | 75 | 18 | 103 | 6.1 | 112 | 39 | 110 | 6.4 |
| 20 = 20 x 12.5* |
85 | 3.9 | – | – | – | – | – | – | – | – | – | – |
| 22/C = 22 x 14.5 |
100 | 4.8 | 100 | 4.8 | 100 | 22 | 130 | 10 | 142 | 44 | 138 | 10.5 |
| 25 = 25 x 16.5* |
110 | 6.3 | – | – | – | – | – | – | – | – | 155 | 16.8 |
| 32/D = 32 x 21.5* |
145 | 10.4 | – | – | 145 | 24 | – | – | – | – | – | – |
| 40/E = 40 x 27* |
180 | 16.3 | – | – | – | – | – | – | – | – | – | – |
*VL Only
| V Belts 2 – Sizes & Properties | ||||||
|---|---|---|---|---|---|---|
| VPFS | VM | VMS | VMW – Cogged | VMW-NK (Non-Cogged) | ||
 |
 |
|
 |
|
||
| Hardness | 88 A / 37 D | 90 A / 40 D | 90A/40D | 95 A / 46 D | 95 A / 46 D | |
| USDA/FDA | Yes | No | Yes | Yes | Yes | |
| Coeff. friction (Steel) | 0.38 | 0.45 | 0.45 | 0.36 | 0.36 | |
| Temp. range | -30/+60°C | -30/+60°C | -30°C to 60°C | -30/+60°C | -30/+60°C | |
| Size W x H (mm) | Min. pulley dia. (mm) |
Pull force (1%) kg. | Min. pulley dia. (mm) |
Pull force (1%) kg. | Min. pulley dia. (mm) |
Pull force (1%) kg. | Min. pulley dia. (mm) |
Pull force (0.5%) kg. | Min. pulley dia. (mm) |
Pull force (0.5%) kg. |
|---|---|---|---|---|---|---|---|---|---|---|
| 8/M = 8 x 5.2 |
– | – | 60 | 3 | – | – | – | – | – | – |
| 10/Z = 10 x 6.5 |
– | – | 65 | 4.1 | 65 | 4.1 | – | – | 75 | 12 |
| 13/A = 13 x 8 |
92 | 28 | 80 | 6.7 | 80 | 6.7 | 75 | 14 | 100 | 16 |
| 17/B = 17 x 11.5 |
118 | 43 | 115 | 12.1 | 115 | 12.1 | 100 | 27 | 140 | 30 |
| 20 = 20 x 12.5 |
– | – | 125 | 15.9 | – | – | – | – | – | – |
| 22/C = 22 x 14.5 |
150 | 49 | 145 | 20 | – | – | 130 | 36 | 200 | 40 |
| 25 = 25 x 16.5 |
– | – | 165 | 25.9 | – | – | – | – | 210 | 45 |
| 32/D = 32 x 21.5 |
– | – | 215 | 43 | – | – | – | – | 270 | 55 |
| 40/E = 40 x 27 |
– | – | 270 | 67.3 | – | – | – | – | – | – |
| V Belts 3 – Sizes & Properties | ||||||
|---|---|---|---|---|---|---|
| VO | VO-GT | VOS | VH | VHB | ||
 |
 |
 |
 |
|
||
| Hardness | 80 A | 83 A | 83 A | 100 A / 55 D | 100A/55D | |
| USDA/FDA | Yes | Yes | Yes | Yes | Yes | |
| Coeff. friction (Steel) | 0.55 | 0.55 | 0.55 | 0.28 | 0.28 | |
| Temp. range | -40/+55°C | -40/+55°C | -40/+55°C | -20/+75°C | -20°C to 75°C | |
| Size W x H (mm) | Min. pulley dia. (mm) |
Pull force (1%) kg. |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
V section equiv. |
Min. pulley dia. (mm) |
Pull force (0.5%) kg. | Min. pulley dia. (mm) |
Pull force (0.5%) kg. | Min. pulley dia. (mm) |
Pull force (1%) kg. |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/Y = 6 x 4 |
– | – | – | – | Y | 25 | 3.10 | – | – | – | – |
| 8/M = 8 x 5.2 |
– | – | – | – | – | – | – | 125 | 4.8 | – | – |
| 9.5/3L = 9.5 x 5.5 |
45 | 0.9 | – | – | 3L | – | – | – | – | – | – |
| 10/Z = 10 x 6.5 |
– | – | – | – | – | – | – | 130 | 6.6 | – | – |
| 13/A = 13 x 8 |
50 | 1.6 | – | – | A | 53 | 12 | 160 | 10.7 | 160 | 10.70 |
| 17/B = 17 x 11.5 |
75 | 2.9 | 75 | 2.9 | B | 72 | 17 | 230 | 19.5 | 230 | 19.5 |
| 20 = 20 x 12.5 |
– | – | – | – | – | – | – | 250 | 25.5 | – | – |
| 22/C = 22 x 14.5 |
100 | 4.6 | 100 | 4.6 | C | 100 | 22 | 290 | 32 | 290 | 32 |
| 25 = 25 x 16.5 |
– | – | – | – | – | – | – | 330 | 41.5 | – | – |
| 32/D = 32 x 21.5 |
145 | 10.4 | – | – | D | – | – | – | – | – | – |
| Double V Belts – Sizes & Properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| DVL | DVLW | DVO | DVOS | DVM | ||||||
 |
 |
 |
 |
 |
||||||
| Hardness | 80 A | 80 A | 83 A | 83 A | 90 A / 40 D | |||||
| USDA/FDA | Yes | Yes | Yes | Yes | No | |||||
| Coeff. friction (Steel) | 0.55 | 0.55 | 0.55 | 0.55 | 0.45 5 | |||||
| Temp. range | -40/+55°C | -40/+55°C | -40/+55°C | -40/+55°C | -30/+60°C | |||||
| Size W (w) x H (mm) | Min. pulley dia. (mm) | Pull force (1%) kg. | Min. pulley dia. (mm) | Pull force (0.5%) kg. | Min. pulley dia. (mm) | Pull force (1%) kg. | Min. pulley dia. (mm) | Pull force (1%) kg. | Min. pulley dia. (mm) | Pull force (1%) kg. |
|---|---|---|---|---|---|---|---|---|---|---|
| Z = 24 (9.50) x 6.8 |
45 | 2 | – | – | 45 | 2 | – | – | – | – |
| A = 30 (13.0 ) x 8.0 |
50 | 3.2 | 50 | 22 | 50 | 3.2 | 53 | 22 | 80 | 13.4 |
Backing for V Belts
Material with high coeffcient of friction. Available in thickness from 2mm to 6mm.
| FSTF (FOAM) | FEST (HIGH GRIP) | MST – 6. (MULTI GRIP) | GST – 4 (SUPER GRIP) |
|---|---|---|---|
 |
 |
 |
 |
| Food Approved Soft Material | |||||
| Products | Colour | Hardness | Temperature range | CoF(Steel) | FDA |
|---|---|---|---|---|---|
| Round Profiles | TB Transparent | 72 A | -40°C to +40°C | 0.85 | Yes |
| “V” Profiles | |||||
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...