Volta Belting PU Round Belts
Round section from 76-100 Shore ‘A’. FDA/USDA grades availability.
| Round Belts 1 – Sizes & Properties | ||||||
|---|---|---|---|---|---|---|
| RFC | RL/RLC | RLW | RO | ROS | RLB | |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
| Hardness | 76 A | 80 A | 80A | 83 A | 83 A | 80 A |
| USDA/FDA | Yes | Yes | Yes | Yes | Yes | Yes |
| Temp. range | -40/+50°C | -40/+55°C | -40 /+55°C | -40/+55°C | -40/+55°C | -40 /+55°C |
| Coeff. friction (Steel) |
0.65 | 0.55 | 0.55 | 0.55 | 0.55 | 0.55 |
| Diameter mm (inch) |
Min. pulley dia. ( mm) |
Pull force (1%) kg. |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
Min. pulley dia. (mm) |
Pull force (0.5%) kg. |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
Min. pulley dia. (mm) |
Pull force (0.3%) kg. |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 (5/64) | – | – | 15 | 0.06 | – | – | 15 | 0.06 | – | – | – | – |
| 3 (1/8) | – | – | 20 | 0.14 | – | – | 20 | 0.14 | – | – | 20 | 0.14 |
| 4 (5/32) | 20 | 0.2 | 30 | 0.25 | – | – | 30 | 0.25 | – | – | 30 | 0.25 |
| 5 (3/16) | 25 | 0.3 | 35 | 0.4 | – | – | 34 | 0.4 | – | – | 35 | 0.4 |
| 6 (15/64) | – | – | 38* | 0.55* | – | – | – | – | – | – | – | – |
| 6.3 (1/4) | – | – | 40 | 0.6 | – | – | 38 | 0.68 | 42 | 4.5 | 40 | 0.6 |
| 8 (5/16) | 40 | 0.75 | 55 | 1 | – | – | 48 | 1.06 | 54 | 5 | 55 | 1 |
| 9.5 (3/8) | – | – | 65 | 1.4 | – | – | 57 | 1.54 | 64 | 9.5 | 65 | 1.4 |
| 10 (25/64) | – | – | 70 | 1.55 | – | – | – | – | – | – | 70 | 1.55 |
| 12.5 (1/2) | – | – | 85 | 2.5 | 90 | 18 | 75 | 2.72 | 86 | 11.4 | 85 | 2.5 |
| 14 (9/16) | – | – | – | – | – | – | 84 | 3.43 | 95 | 12.3 | – | – |
| 15 (19/32) | – | – | 100 | 3.5 | – | – | – | – | – | – | 100 | 3.5 |
| 16 (5/8) | – | – | – | – | – | – | 95 | 4.25 | 108 | 13.6 | – | – |
| 18 (23/32) | – | – | 120 | 5.1 | 125 | 27 | – | – | – | – | – | – |
| 19 (3/4) | – | – | – | – | – | – | 115 | 6.11 | 127 | 15 | – | – |
| 25 (1) | – | – | – | – | – | – | 150 | 10.6 | – | – | – | – |
* RLC Only
Round section from 80-100 Shore ‘A’. FDA/USDA grades availability.
| Round Belts 2 – Sizes & Properties | ||||||
|---|---|---|---|---|---|---|
| RPZ | RPZS | RPN/RPN-NT* | RPS | RPB | RPBS | |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
| Hardness | 86 A | 88 A | 88 A | 88 A | 88A | 88A |
| USDA/FDA | No | No | No | No | Yes | Yes |
| Temp. range | -20 /+50°C | -20 /+50°C | -30 /+80°C | -30 /+80°C | -30°C to +80°C | -30°C to +80°C |
| Coef. friction (Steel) |
0.5 | 0.5 | 0.38 | 0.4 | 0.38 | 0.40 |
| Diameter mm (inch) |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
Min. pulley dia. (mm) |
Pull force (1%) kg. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 (5/64) | – | – | – | – | 19 | 0.13 | – | – | 19 | 0.13 | – | – |
| 3 (1/8) | – | – | – | – | 29 | 0.31 | – | – | 29 | 0.31 | – | – |
| 4 (5/32) | – | – | – | – | 38 | 0.54 | – | – | 38 | 0.54 | – | – |
| 5 (3/16) | 45 | 0.8 | – | – | 48 | 0.85 | 50 | 11 | 48 | 0.85 | – | – |
| 6 (15/64) | 54 | 1.16 | – | – | 57 | 1.22 | 60 | 16 | 57 | 1.22 | 60 | 16 |
| 6.3 (1/4) | – | – | – | – | – | – | – | – | – | – | – | – |
| 7 (9/32) | – | – | – | – | 67 | 1.67 | 70 | 18 | – | – | – | – |
| 8 (5/16) | 72 | 2.05 | – | – | 76 | 2.18 | 80 | 19 | 76 | 2.18 | 80 | 19 |
| 9 (23/64) | – | – | – | – | 86 | 2.75 | 90 | 21 | – | – | – | – |
| 9.5 (3/8) | – | – | – | – | – | – | – | – | – | – | – | – |
| 10 (25/64) | 89 | 3.2 | 95 | 19.5 | 95 | 3.4 | 100 | 22 | 95 | 3.4 | 100 | 22 |
| 12 (15/32) | 108 | 4.56 | 112 | 23 | 114 | 4.9 | 120 | 26 | 114 | 4.9 | 120 | 26 |
| 12.5 (1/2) | – | – | – | – | – | – | – | – | – | – | – | – |
| 14 (9/16) | – | – | – | – | – | – | – | – | – | – | – | – |
| 15 (19/32) | 135 | 7.25 | 140 | 24 | 143 | 7.65 | 150 | 27 | 143 | 7.65 | 150 | 27 |
| 18 (23/32) | – | – | – | – | 171 | 11 | 180 | 37 | 171 | 11 | – | – |
| 19 (3/4) | – | – | – | – | – | – | – | – | – | – | – | – |
| 20 (25/32) | – | – | – | – | 190 | 13.6 | – | – | – | – | – | – |
| 25 (1) | – | – | – | – | – | – | – | – | – | – | – | – |
* RPN-NT is a smooth finish Non Textured
Round section from 63 Shore ‘D’-100 Shore ‘A’. FDA/USDA grades availability.
| Round Belts 3 – Sizes & Properties | ||||||
|---|---|---|---|---|---|---|
| RM | RMS | RMW | RCW | RH | ||
![]() |
![]() |
![]() |
![]() |
|||
| Hardness | 90 A | 90A | 95 A | 63 D | 100 A | |
| USDA/FDA | No | Yes | Yes | Yes | Yes | |
| Temp. range | -30 /+60 °C | -30°C to +60°C | -30 /+60 °C | -20 /+75 °C | -20 /+75 °C | |
| Coef. friction (Steel) |
0.45 | 0.45 | 0.36 | 0.27 | 0.28 | |
| Diameter mm (inch) |
Min. pulley dia. (mm) |
Pull force (1%) kg. | Min. pulley dia. (mm) |
Pull force (1%) kg. | Min. pulley dia. (mm) |
Pull force (0.5%) kg. | Min. pulley dia. (mm) |
Pull force (0.5%) kg. | Min. pulley dia. (mm) |
Pull force (1%) kg. |
|---|---|---|---|---|---|---|---|---|---|---|
| 2 (5/64) | 20 | 0.26 | – | – | – | – | – | – | 40 | 0.6 |
| 3 (1/8) | 30 | 0.6 | – | – | – | – | – | – | 60 | 1.4 |
| 4 (5/32) | 40 | 1 | 40 | 1 | – | – | – | – | 80 | 2.5 |
| 5 (3/16) | 50 | 1.6 | – | – | – | – | – | – | 100 | 3.9 |
| 6.3 (1/4) | 60 | 2.6 | 60 | 2.6 | 75 | 10 | 100 | 13 | 125 | 6.2 |
| 8 (5/16) | 80 | 4.2 | 80 | 4.2 | 95 | 17 | – | – | 160 | 10 |
| 9.5 (3/8) | 95 | 5.9 | – | – | 110 | 18 | 150 | 20 | 190 | 14 |
| 12.5 (1/2) | 125 | 10.1 | – | – | 150 | 28 | 200 | 21 | 250 | 16 |
| 15 (19/32) | 150 | 14.6 | 150 | 14.6 | 175 | 30 | – | – | 300 | 23 |
| 18 (23/32) | 180 | 21 | – | – | 210 | 32 | – | – | 360 | 34 |
| 20 (25/32) | 200 | 25.9 | – | – | – | – | – | – | – | – |
| Food Approved Soft Material | |||||
| Products | Colour | Hardness | Temperature range | CoF(Steel) | FDA |
|---|---|---|---|---|---|
| Round Profiles | TB Transparent | 72 A | -40°C to +40°C | 0.85 | Yes |
| “V” Profiles | |||||
Volta TPE Round Belts
Canning lines demand reliable, low‑friction components to protect both printed tin sheets and the inner can surface during production.
Special round‑profile belts are essential for guiding sheets through printing without scratching, and for supporting long filling lines—often hundreds of metres—where stationary cans rest on belts as the line runs beneath them. Volta meets these demands with a range of durable TPE round belts available in multiple diameters, including reinforced options such as steel‑cord constructions to prevent elongation under heavy loads.











