Imperial Bevel Gear in Steel Sets 2:1 Ratio 12DP
- Intermediate sizes and special mitres to drawing
- DIN 3964, DIN 3967, DIN 3971
- Standard tolerances, unless otherwise stated ±0.25 mm
- Shaft axis to intersect within ±0.025mm
- Angular accuracy between shafts ±5mins
- Mounting distance tolerance ±0.05mm
- Bore tolerance H8
- Cut to the Gleason System
- 20° pressure angle
- Supplied in pairs
- All dimensions in mm
- Steel EN8, (080M40/080M46) or equivalent 1:1 Ratio
| Code | DP | No . Teeth | dp (in) | A +V (in) | dm (in) | Bore (H8) | F (in) | A (in) | de (in) | Lm (in) | S (in) |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
SRBDP12/2*
|
12 | 18 |
1.500
|
2.187
|
1.365
|
0.438
|
0.500
|
1.168
|
1.701
|
0.653 | 0 |
| 12 | 36 |
3.000
|
1.625
|
1.875
|
0.750
|
0.500
|
1.129
|
3.049
|
0.598
|
0.111
|
Please note: * Comes with M6 G/S hole in hubs of both gears. All dimensions subject to change. If a dimension is critical to your application please contact our Sales
Department for confirmation. For special or reworked gears please contact our Manufacturing Department for a quotation.
(1 votes, average: 5.00 out of 5)
Loading...