Metric Bevel Gear Sets in Steel 1.5:1 Ratio, 1.0 – 5.0 MOD
- Intermediate sizes and special mitres to drawing
- DIN 3964, DIN 3967, DIN 3971
- Standard tolerances, unless otherwise stated ±0.25 mm
- Shaft axis to intersect within ±0.025mm
- Angular accuracy between shafts ±5mins
- Mounting distance tolerance ±0.05mm
- Bore tolerance H8
- Cut to the Gleason System
- 20° pressure angle
- Supplied in pairs
- All dimensions in mm
- Steel EN8, (080M40/080M46) or equivalent 1:1 Ratio
| Code | Pitch Module | No. Teeth | dp (mm) | A+V (mm) | dm (mm) | Bore (H8) | F (mm) | A (mm) | de (mm) | S (mm) | Lm (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SRB10/1.5 | 1 | 16 | 16 | 20 | 13.3 | 4 | 4.3 | 12 | 18.1 | 0 | 7 |
| 1 | 24 | 24 | 20 | 20.3 | 5 | 4.3 | 14.8 | 24.8 | 1.5 | 9.3 | |
| SRB15/1.5 | 1.5 | 16 | 24 | 31 | 20.3 | 8 | 8 | 20.3 | 27.1 | 0 | 11.8 |
| 1.5 | 24 | 36 | 32 | 28.3 | 8 | 8 | 24.9 | 37.2 | 2.2 | 16 | |
| SRB20/1.5 | 2 | 16 | 32 | 40 | 25.3 | 8 | 10 | 25.2 | 36.2 | 0 | 13.8 |
| 2 | 24 | 48 | 37 | 32.3 | 8 | 10 | 27.2 | 49.7 | 2.5 | 16 | |
| SRB25/1.5 | 2.5 | 16 | 40 | 49 | 32.3 | 12 | 13 | 30.8 | 45.2 | 0 | 16.4 |
| 2.5 | 24 | 60 | 46 | 45.3 | 14/16 | 13 | 34 | 62.1 | 3.2 | 20 | |
| SRB30/1.5 | 3 | 16 | 48 | 55 | 40.3 | 12 | 14.5 | 32.4 | 54.3 | 0 | 16.4 |
| 3 | 24 | 72 | 51 | 55.3 | 16 | 14.5 | 36.2 | 74.5 | 4.2 | 20 | |
| SRB35/1.5 | 3.5 | 16 | 56 | 66 | 45.3 | 16 | 18 | 40.4 | 63.3 | 0 | 20.4 |
| 3.5 | 24 | 84 | 61 | 55.3 | 20 | 18 | 44.2 | 86.9 | 4.2 | 25 | |
| SRB40/1.5 | 4 | 16 | 64 | 78 | 50.3 | 16 | 18 | 46.8 | 72.4 | 0 | 25.4 |
| 4 | 24 | 96 | 66 | 60.3 | 20 | 18 | 45.5 | 99.3 | 5.5 | 25 | |
| SRB45/1.5 | 4.5 | 16 | 72 | 83 | 60.3 | 20 | 20 | 47.6 | 81.4 | 0 | 25.1 |
| 4.5 | 24 | 108 | 81 | 80.3 | 20/25 | 20 | 57.8 | 111.7 | 6.5 | 35 | |
| SRB50/1.5 | 5 | 16 | 80 | 92 | 60.3 | 20/25 | 24 | 54.1 | 90.5 | 0 | 25.4 |
| 5 | 24 | 120 | 86 | 80.3 | 25/30 | 24 | 61.1 | 124.1 | 6.6 | 35 |
Please note: * Supplied with black oxide finish. All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation. For special or reworked gears please contact our Manufacturing Department for a quotation.
(1 votes, average: 5.00 out of 5)
Loading...