F1 Flat Belts BRECO® Open Length (M)
Polyurethane, Steel reinforced, extruded open length flat belting.
Properties for F1 BRECO® (M)
- Low noise
- Highly flexible
- Wear resistant
- Small build sizes
- Hydrolysis resistant
- Constant length
- Resistant against simple oils, fats and petrol
- Low elongation
- Resistant to some acids
| Belt widths (mm) Intermediate belt widths on request | |||
|---|---|---|---|
| 8 | 10 | 15 | 20 |
Allowable tensile load by belt width
| BRECO/F1 (M) | Tension cord strengths F/Belts weights | |||
|---|---|---|---|---|
| Belt width b (mm) | 8 | 10 | 15 | 20 |
| E/Steel tension member F (N) | 300 | 360 | 510 | 720 |
| VA tension member F (N) | 230 | 275 | 390 | 550 |
| Belt weight (kg/m) | 0,012 | 0,015 | 0,023 | 0,030 |
| F1 | Available lengths and versions |
|---|---|
| Standard delivery lengths (M) | Rolls of 100m |
| Cut/Lengths > 100m Length graduation from groove to groove (in 10mm stages) | On request |
| Minimum length joined (V) | – |
| Standard material | TPUST1) |
| Steel tension member (standard) | x |
| E tension member | o |
| VA tension member | o |
| PAZ (groove side) | – |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
VA Stainless Steel cords
– Not available
1) Further materials on request
Drive Type A
| Without contra-flexure | Steel tension member | E tension member | VA tension member |
|---|---|---|---|
| dmin | 16 | 12 | 30 |
 |
|||
Drive Type B
| With contra-flexure | Steel tension member | E tension member | VA tension member |
|---|---|---|---|
| Zmin | 30 | 18 | 60 |
| dmin Sp | 30 | 18 | 60 |
 |
|||
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...