F2 Flat Belts BRECO® Open Length (M)/Joined (V)
Polyurethane, Steel reinforced, extruded endless flat belting.
Properties for F2 BRECO® (M/V)
- Low noise
- Highly flexible
- Wear resistant
- Small build sizes
- Hydrolysis resistant
- Constant length
- Resistant against simple oils, fats and petrol
- Low elongation
- Resistant to some acids
| Belt widths (mm) Intermediate belt widths on request | ||||
|---|---|---|---|---|
| 25 | 32 | 50 | 75 | 100 |
| F2 | Available lengths and versions |
|---|---|
| Standard delivery lengths (M) | Rolls of 50 or 100m |
| Cut/Lengths > 100m Length graduation from groove to groove (in 10mm stages) | On request |
| Minimum length joined (V) | 880 |
| Standard material | TPUST1) |
| Steel tension member (standard) | x |
| E tension member | o |
| VA tension member | o |
| PAZ (groove side) | x |
Allowable tensile load by belt width
| BRECO/F2 (M/V) | Tension cord strengths F/Belts weights | |||||
|---|---|---|---|---|---|---|
| Belt width b (mm) | 25 | 32 | 50 | 75 | 100 | |
| M | E/Steel tension member F (N) | 2200 | 2600 | 4400 | 6600 | 8800 |
| VA Tension member F (N) | 1760 | 2080 | 3520 | 5280 | 7040 | |
| V | E/Steel tension member F (N) | 1100 | 1300 | 2200 | 3300 | 4400 |
| VA tension member F (N) | 8800 | 1040 | 1760 | 2640 | 3520 | |
| Belt weight (kg/m) | 0,081 | 0,101 | 0,161 | 0,241 | 0,322 | |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
VA Stainless Steel cords
– Not available
1) Further materials on request
Drive Type A
| Without contra-flexure | Steel tension member | E tension member | VA tension member |
|---|---|---|---|
| dmin | 30 | 25 | 60 |
 |
|||
Drive Type B
| With contra-flexure | Steel tension member | E tension member | VA tension member |
|---|---|---|---|
| Zmin | 60 | 50 | 130 |
| dmin Sp | 60 | 50 | 130 |
 |
|||
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...