Metric Mitre Gear Sets in Steel, 3.0 – 3.5 MOD
- Intermediate sizes and special mitres to drawing
- DIN 3964, DIN 3967, DIN 3971
- Standard tolerances, unless otherwise stated ±0.25 mm
- Shaft axis to intersect within ±0.025mm
- Angular accuracy between shafts ±5mins
- Mounting distance tolerance ±0.05mm
- Bore tolerance H8
- Cut to the Gleason System
- 20° pressure angle
- Supplied in pairs
- All dimensions in mm
- Steel EN8, (080M40/080M46) or equivalent 1:1 Ratio
Code | Pitch Module | No. Teeth | dp(mm) | A+V(mm) | dm(mm) | Bore H8 | F(mm) | A(mm) | de(mm) | Lm(mm) | S(mm) |
---|---|---|---|---|---|---|---|---|---|---|---|
SBM30/16 | 3 | 16 | 48 | 46 | 40.30 | 12 | 12 | 31.70 | 52.50 | 18 | 0 |
SBM30/18N | 3 | 18 | 54 | 52 | 40 | 14 | 14 | 36.24 | 57.50 | 18 | 4 |
SBM30/19 | 3 | 19 | 57 | 54 | 40.30 | 14 | 13 | 36 | 61.20 | 17 | 0 |
SBM30/20N | 3 | 20 | 60 | 55 | 45 | 14 | 16 | 37.63 | 64.24 | 20 | 4 |
SBM30/22 | 3 | 22 | 66 | 58 | 50.30 | 16 | 15 | 36.90 | 70.20 | 17 | 0 |
SBM30/25N | 3 | 25 | 75 | 70 | 50 | 16 | 16 | 45.29 | 79.24 | 24 | 4 |
SBM30/26 | 3 | 26 | 78 | 64 | 50.30 | 16 | 17 | 38.40 | 82.20 | 18 | 0 |
SBM30/28N | 3 | 28 | 84 | 76 | 55 | 16 | 18 | 48.21 | 88.24 | 25 | 4 |
SBM30/30 | 3 | 30 | 90 | 74 | 60.30 | 20 | 19 | 43.80 | 94.20 | 22 | 0 |
SBM30/32N | 3 | 32 | 96 | 82 | 66 | 16 | 20 | 49.63 | 100.24 | 25 | 4 |
SBM35/16 | 3.5 | 16 | 56 | 53 | 45.30 | 16 | 14 | 36.40 | 60.90 | 20 | 0 |
SBM35/19 | 3.5 | 19 | 65.5 | 58.8 | 50.30 | 18 | 15 | 37.80 | 71.50 | 19 | 0 |
SBM35/20N | 3.5 | 20 | 70 | 65 | 50 | 16 | 18 | 44.3 | 74 | 22 | 5 |
SBM35/22 | 3.5 | 22 | 77 | 64 | 55.30 | 20 | 17 | 39.10 | 81.90 | 18 | 0 |
SBM35/25N | 3.5 | 25 | 87.5 | 76 | 60 | 16 | 20 | 48.07 | 92.45 | 25 | 5 |
SBM35/26 | 3.5 | 26 | 91 | 73.05 | 62.30 | 20 | 20 | 43.35 | 96 | 20 | 0 |
SBM35/30 | 3.5 | 30 | 105 | 82 | 70.30 | 20 | 23 | 47.10 | 110 | 22 | 0 |
Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation. For special or reworked gears please contact our Manufacturing Department for a quotation.