You must login to access this content


Login



New to site? Request TransDev account

Already have an account? Login


Signup

Metric Spur Gears in 30% Glass-Filled Nylon 6, 1.0 MOD, 20° P.A

Metric Spur Gears in 30% Glass-Filled Nylon 6, 1.0 MOD, 20° P.A

  • Intermediate sizes and special gears to
    drawing (tooling charges may apply)
  • Bore unmachined typically 0.5-1mm undersize
  • Standard tolerances, unless
    otherwise stated ±0.25mm
  • Max recommended working temperature 130°C
  • All dimensions in mm
  • Moulded Nylon 6 (PA6), 30% Glass filled
  • Also available in Blue Acetal food grade material
Code No. of Teeth Pitch Ø B Pre-bore (rough) Hub/Boss Ø D Outside Ø A O/A Width F Face Width G
PS10/12B 12 12 4 9 14 25 15
PS10/13B 13 13 4 10 15 25 15
PS10/14B 14 14 4 10 16 25 15
PS10/15B 15 15 4 10 17 25 15
PS10/16B 16 16 5 13 18 25 15
PS10/17B 17 17 5 14 19 25 15
PS10/18B 18 18 5 14 20 25 15
PS10/19B 19 19 5 16 21 25 15
PS10/20B 20 20 5 16 22 25 15
PS10/21B 21 21 6 18 23 25 15
PS10/22B 22 22 6 18 24 25 15
PS10/23B 23 23 6 18 25 25 15
PS10/24B 24 24 6 20 26 25 15
PS10/25B 25 25 6 20 27 25 15
PS10/26B 26 26 6 22 28 25 15
PS10/27B 27 27 6 22 29 25 15
PS10/28B 28 28 6 22 30 25 15
PS10/29B 29 29 6 25 31 25 15
PS10/30B 30 30 6 25 32 25 15
PS10/32B 32 32 6 25 34 25 15
PS10/35B 35 35 8 30 37 25 15
PS10/36B 36 36 8 30 38 25 15
PS10/38B 38 38 8 30 40 25 15
PS10/39B 39 39 8 30 41 25 15
PS10/40B 40 40 8 30 42 25 15
PS10/41B 41 41 8 30 43 25 15
PS10/42B 42 42 10 35 44 25 15
PS10/44B 44 44 10 35 46 25 15
PS10/45B 45 45 10 35 47 25 15
PS10/47B 47 47 10 35 49 25 15
PS10/48B 48 48 10 35 50 25 15
PS10/50B 50 50 10 35 52 25 15
PS10/52B 52 52 14 35 54 25 15
PS10/55B 55 55 14 35 57 25 15
PS10/58B 58 58 14 35 60 25 15
PS10/60B 60 60 14 40 62 25 15
PS10/64B 64 64 14 40 66 25 15
PS10/70B 70 70 20 40 72 25 15
PS10/75B 75 75 20 40 77 25 15
PS10/80B 80 80 20 40 82 25 15
PS10/95B 95 95 20 50 97 25 15
PS10/110B 110 110 20 50 112 25 15

Please note:
All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.For special or reworked gears please contact our Manufacturing Department for a quotation.

It is recommended that when the bores in ‘PS’ Moulded Spur Gears are machined they are machined to the bore size stated or very close to the catalogue size. Boring these Gears to a much larger bore diameter could increase the possibility of discovering small voids or cavities in this area.

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
Read More Okay