Imperial Spur Gears in Steel 12DP, 20° P.A
- Intermediate sizes and special gears
to drawing up to 39″ diameter - Standard tolerances, unless
otherwise stated ±0.010 ins - Standard: BS 436 Pt1, fig 1. Grade 8 / 9
- All dimensions in inches
- Steel EN8, (080M40/080M46) or equivalent
Code | No. of Teeth | Pitch Ø dp | Outside Ø de | Hub/Boss Ø dm | Bore Ø H8 | O/A Width A | Face Width B |
---|---|---|---|---|---|---|---|
SSDP12/12B | 12 | 1 | 1.167 | 0.75 | 0.5 | 1.25 | 0.75 |
SSDP12/13B | 13 | 1.083 | 1.25 | 0.75 | 0.5 | 1.25 | 0.75 |
SSDP12/14B | 14 | 1.167 | 1.334 | 0.88 | 0.5 | 1.25 | 0.75 |
SSDP12/15B | 15 | 1.25 | 1.417 | 1 | 0.625 | 1.25 | 0.75 |
SSDP12/16B | 16 | 1.333 | 1.5 | 1 | 0.625 | 1.25 | 0.75 |
SSDP12/18B | 18 | 1.5 | 1.667 | 1.25 | 0.625 | 1.25 | 0.75 |
SSDP12/20B | 20 | 1.667 | 1.834 | 1.25 | 0.625 | 1.25 | 0.75 |
SSDP12/21B | 21 | 1.75 | 1.917 | 1.25 | 0.625 | 1.25 | 0.75 |
SSDP12/22B | 22 | 1.833 | 2 | 1.25 | 0.625 | 1.25 | 0.75 |
SSDP12/24B | 24 | 2 | 2.167 | 1.25 | 0.625 | 1.25 | 0.75 |
SSDP12/30B | 30 | 2.5 | 2.667 | 1.25 | 0.625 | 1.25 | 0.75 |
SSDP12/32B | 32 | 2.667 | 2.834 | 1.25 | 0.625 | 1.25 | 0.75 |
SSDP12/36B | 36 | 3 | 3.167 | 1.25 | 0.625 | 1.25 | 0.75 |
SSDP12/40B | 40 | 3.333 | 3.5 | 2.5 | 0.625 | 1.25 | 0.75 |
SSDP12/48B | 48 | 4 | 4.167 | 2.5 | 0.75 | 1.5 | 0.75 |
SSDP12/54B | 54 | 4.5 | 4.667 | 2.5 | 0.75 | 1.5 | 0.75 |
SSDP12/60B | 60 | 5 | 5.167 | 2.5 | 0.75 | 1.5 | 0.75 |
SSDP12/64B | 64 | 5.333 | 5.5 | 2.5 | 0.75 | 1.5 | 0.75 |
SSDP12/72B | 72 | 6 | 6.167 | 2.5 | 0.75 | 1.5 | 0.75 |
Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.For special or reworked gears please contact our Manufacturing Department for a quotation.