Imperial Spur Gears in Steel 16DP, 20° P.A
- Intermediate sizes and special gears
to drawing up to 39″ diameter - Standard tolerances, unless
otherwise stated ±0.010 ins - Standard: BS 436 Pt1, fig 1. Grade 8 / 9
- All dimensions in inches
- Steel EN8, (080M40/080M46) or equivalent
| Code | No. of Teeth | Pitch Ø dp | Outside Ø de | Hub/Boss Ø dm | Bore Ø H8 | O/A Width A | Face Width B |
|---|---|---|---|---|---|---|---|
| SSDP16/12B | 12 | 0.75 | 0.875 | 0.56 | 0.375 | 0.937 | 0.5 |
| SSDP16/13B | 13 | 0.813 | 0.938 | 0.63 | 0.375 | 0.937 | 0.5 |
| SSDP16/14B | 14 | 0.875 | 1 | 0.69 | 0.375 | 0.937 | 0.5 |
| SSDP16/15B | 15 | 0.938 | 1.063 | 0.75 | 0.5 | 0.937 | 0.5 |
| SSDP16/16B | 16 | 1 | 1.125 | 0.81 | 0.5 | 0.937 | 0.5 |
| SSDP16/18B | 18 | 1.125 | 1.25 | 0.94 | 0.5 | 0.937 | 0.5 |
| SSDP16/20B | 20 | 1.25 | 1.375 | 1 | 0.5 | 0.937 | 0.5 |
| SSDP16/22B | 22 | 1.375 | 1.5 | 1 | 0.5 | 0.937 | 0.5 |
| SSDP16/24B | 24 | 1.5 | 1.625 | 1 | 0.5 | 0.937 | 0.5 |
| SSDP16/26B | 26 | 1.625 | 1.75 | 1 | 0.5 | 0.937 | 0.5 |
| SSDP16/28B | 28 | 1.75 | 1.875 | 1.25 | 0.625 | 1 | 0.5 |
| SSDP16/30B | 30 | 1.875 | 2 | 1.25 | 0.625 | 1 | 0.5 |
| SSDP16/32B | 32 | 2 | 2.125 | 1.25 | 0.625 | 1 | 0.5 |
| SSDP16/36B | 36 | 2.25 | 2.375 | 1.25 | 0.625 | 1 | 0.5 |
| SSDP16/40B | 40 | 2.5 | 2.625 | 1.25 | 0.625 | 1 | 0.5 |
| SSDP16/48B | 48 | 3 | 3.125 | 1.25 | 0.625 | 1 | 0.5 |
| SSDP16/54B | 54 | 3.375 | 3.5 | 1.25 | 0.625 | 1 | 0.5 |
| SSDP16/56B | 56 | 3.5 | 3.625 | 1.25 | 0.625 | 1 | 0.5 |
| SSDP16/60B | 60 | 3.75 | 3.875 | 1.25 | 0.625 | 1.125 | 0.5 |
| SSDP16/64B | 64 | 4 | 4.125 | 1.25 | 0.625 | 1.125 | 0.5 |
Please note: All dimensions subject to change. If a dimension is critical to your application please contact our Sales Department for confirmation.For special or reworked gears please contact our Manufacturing Department for a quotation.
(1 votes, average: 5.00 out of 5)
Loading...