TRANSLOCK® ‘STN’ Stainless Steel Keyless Shaft Locking Bush 4mm to 20mm Bores
| TRANSLOCK® Bushes |
  |
| Type TRSTN |
- Stainless Steel 304 (1.4301)
- Simple and easy maintenance
- Axial and radial positioning on shaft
- Uses – fixing gears and pulleys to shafts
- Minimal fixing requirements needed
- For lower torques
Required tolerances
- Shaft: h8
- Bore of part to be clamped: H8
| Metric bores | ||||||||
|---|---|---|---|---|---|---|---|---|
| Stock no. | Bore d (mm) | Outside diameter D (mm) | Dimensions( mm) | NV (Thread) | Tightening Torque (NM) | Max Torque (Nm) |
||
| SW | H | H1 | ||||||
| TRSTN4x8 | 4 | 8 | 8 | 15 | 12.5 | M6x0.5 | 4 | 3 |
| TRSTN5x10 | 5 | 10 | 10 | 15 | 12.5 | M8x0.5 | 5 | 4 |
| TRSTN6x10 | 6 | 10 | 10 | 15 | 12.5 | M8x0.5 | 8 | 7 |
| TRSTN6.35×10 | 6.35 | 10 | 10 | 15 | 12.5 | M8x0,5 | 8 | 7 |
| TRSTN7x12 | 7 | 12 | 12 | 15 | 12.0 | M10x0.75 | 9 | 8 |
| TRSTN8x14 | 8 | 14 | 16 | 22 | 19.0 | M12x1 | 15 | 14 |
| TRSTN9x14 | 9 | 14 | 16 | 22 | 19.0 | M12x1 | 15 | 14 |
| TRSTN9.53×14 | 9.53 | 14 | 16 | 22 | 19.0 | M12x1 | 15 | 14 |
| TRSTN10x17 | 10 | 17 | 18 | 22 | 18.5 | M15x1 | 19 | 18 |
| TRSTN11x17 | 11 | 17 | 18 | 22 | 18.5 | M15x1 | 19 | 18 |
| TRSTN12x17 | 12 | 17 | 18 | 22 | 18.5 | M15x1 | 19 | 18 |
| TRSTN14x20 | 14 | 20 | 20 | 28 | 23.0 | M17x1 | 25 | 24 |
| TRSTN15x20 | 15 | 20 | 20 | 28 | 23.0 | M17x1 | 25 | 24 |
| TRSTN15.88×23 | 15.88 | 23 | 26 | 28 | 23.0 | M20x1 | 27 | 26 |
| TRSTN16x23 | 16 | 23 | 26 | 28 | 23.0 | M20x1 | 27 | 26 |
| TRSTN17x23 | 17 | 23 | 26 | 28 | 23.0 | M20x1 | 27 | 26 |
| TRSTN19x25 | 19 | 25 | 27 | 28 | 23.0 | M22x1 | 30 | 29 |
| TRSTN20x28 | 20 | 28 | 30 | 28 | 23.0 | M25x1 | 32 | 31 |
(4 votes, average: 3.25 out of 5)
Loading...