BRECO® & BRECOFLEX® Available Versions
| Standard Version, single-sided |
 |
| Standard Version |
The standard version of the BRECO® and BRECOFLEX®
timing belt is a combined construction of two materials: wear resistant polyurethane and high tensile steel cord tension members. The Standard Version is universally applicable for all tasks in drive and conveying technology.
• Ordering code not required
| Standard Version, double-sided |
 |
| Version DL |
The Standard Version of the double-sided BRECO® and
BRECOFLEX® timing belts is a combined construction of two materials: wear resistant polyurethane and high tensile steel cord tension members. Full loadability on both tooth sides. The Standard Version of the DL timing belts are universally applicable for all tasks in drive and conveying technology.
• Ordering code: DL
| Standard version with reinforced belt back |
|
| Version DR |
The DR version is the same as the Standard Version however with a thicker belt back.
• Ordering code: version DR
| Standard version with transport coating |
 |
| Version T |
The T version is the same as the Standard Version with the exception of a transport coating thickness of 1.5mm (T5) and 2mm (T10, T20, AT10 AT20, Imperial timing belts), which is extruded on the belt back. The timing belt in T version is universally applicable for all tasks in conveying technology.
• Ordering code: version T
| Classic Version |
|
| Classic |
A range of economically priced alternatives to the standard version of the BRECO® timing belt is a combined construction of two materials: wear resistant polyurethane and high tensile steel cord tension members. The Classic Version is universally applicable for all tasks in drive and conveying technology.
• Ordering code: CLA
| Nylon tooth facing |
 |
| Version PAZ |
The belt base corresponds to the Standard Version. An additional nylon tooth facing causes a lower friction coefficient, lightens the tooth mesh in the pulley and reduces noise. Transport belts on bed plates run easier and are wear resistant.
• Ordering code: PAZ
| Nylon facing on the back of the belt |
 |
| Version PAR |
The belt base corresponds to the Standard Version. An additional nylon tooth facing causes a lower friction coefficient. Application area in the conveying technology: e.g. for accumulation conveyor (back of the belt runs easier and is wear resistant).
• Ordering code: PAR
• Ordering code: PAZ-PAR (both sides coated)
| Nylon facing on double-sided belts |
 |
| Version DL-PAZ |
The belt base corresponds to the double-sided Standard Version. An additional nylon tooth facing causes a lower friction coefficient, lightens the tooth mesh in the pulley and reduces noise. Transport belts on bed plates run easier and are wear resistant.
• Ordering code: DL-PAZ
(coating only possible on inner side)
Learn More:
(1 votes, average: 5.00 out of 5)
Loading...