AT5 & ATL5 BRECO® Open Length (M) Joined (V)
Polyurethane, steel reinforced, extruded open length & joined – High Power AT Profile in metric pitch with trapezoidal tooth form.
| Also available in BRECOprotect® | See Classic details & options |
| Preferred belt width* (mm) | ||||||
|---|---|---|---|---|---|---|
| 10 | 16 | 25 | 32 | 50 | 75 | 100 |
| AT5 (M/V) | Available lengths and versions |
|---|---|
| Standard delivery lengths (M) | roll of 50 or 100m |
| Cut to lengths/lengths > 100m | On request |
| Minimum length joined (V) | 480mm |
| Standard material | TPUST11) |
| Steel tension member | x |
| E tension member | o |
| Stainless Steel or Aramid member | o |
| PAZ | x |
| PAR | x |
| PAZ-PAR | x |
| DL/DL-PAZ | – |
| DR/DR-PAZ | – |
| T/T- PAZ | – |
x Available, standard lengths (see table) without minimum purchase
o Minimum purchase amount on request
– Not available
1) Further materials on request
Technical Specification
| AT5 – Allowable tensile load | ||||||||
|---|---|---|---|---|---|---|---|---|
| Belt width | b (mm) | 10 | 16 | 25 | 32 | 50 | 75 | 100 |
| Tension member loadings Fadm(N) | M | 700 | 1120 | 1750 | 2240 | 3500 | 5250 | 7000 |
| V | 350 | 560 | 910 | 1120 | 1750 | 2380 | 3500 | |
| Belt weight | kg/m | 0.033 | 0.052 | 0.082 | 0.105 | 0.164 | 0.245 | 0.327 |
| ATL5 – Allowable tensile load | |||||
|---|---|---|---|---|---|
| Belt width | b (mm) | 16 | 25 | 32 | 50 |
| Tension member loadings | Fadm(N) | 1300 | 2000 | 2800 | 4200 |
| Belt weight | kg/m | 0.059 | 0.090 | 0.118 | 0.187 |
| Belt widths (mm) Intermediate belt widths on request | ||||||
|---|---|---|---|---|---|---|
| 16 | 25 | 32 | 50 | |||
| ATL5 (M) | Available lengths and versions |
| Standard delivery lengths (M) | roll of 50 or 100m |
|---|---|
| Cut to lengths/lengths > 100m | On request |
| Minimum length joined (V) | – |
| Standard material | TPUST11) |
| Steel tension member | – |
| E tension member | x |
| Stainless Steel or Aramid member | – |
| PAZ | x |
| PAR | – |
| PAZ-PAR | – |
| DL/DL-PAZ | – |
| DR/DR-PAZ | – |
| T/T- PAZ | – |
Drive Type A
| Type A | AT5 | ATL5 |
| Zmin | 15 | 25 |
| dmin | 25 | 40 |
 |
||
Drive Type B
| Type B | AT5 | ATL5 |
| Zmin | 20 | 25 |
| dmin | 50 | 60 |
 |
||
Zmin = Minimum number of teeth.
dmin= Minimum diameter (mm)
Related Products:
(1 votes, average: 5.00 out of 5)
Loading...