AT10 Standard & GEN III SYNCHROFLEX
Polyurethane, steel reinforced, cast truly endless – High Power AT Profile in metric pitch with trapezoidal tooth form
CONTI SYNCHROFLEX® timing belt AT10
Available version:
- Single-sided
- With E tension member for better flexibility
- With reinforced design upon request
- With Aramid tension member upon request
- Polyurethane special materials upon request
- Antistatic, coloured, mechanical reworked
CONTI SYNCHROFLEX® timing belt AT10 GEN III
Standard version:
- Single-sided red
- High performance composite PU
- Steel cord tension members with high density two filament construction
- 25% more power than standard AT
| Standard stock lengths (mm)/Number of teeth |
|---|
| Length | No. teeth | Std. | GEN III |
|---|---|---|---|
| 440 | 44 |  |
|
| 460 | 46 | |
|
| 500 | 50 | |
|
| 560 | 56 | |
|
| 570 | 57 | |
|
| 580 | 58 | |
|
| 600 | 60 | |
|
| 610 | 61 | |
|
| 660 | 66 | |
|
| 700 | 70 | |
|
| 730 | 73 | |
|
| 780 | 78 | |
|
| 800 | 80 | |
|
| 840 | 84 | |
|
| 840 FN2 | 84 | ◯ | ◯ |
| 880 | 88 | |
|
| 890 | 89 | |
|
| 920 | 92 | |
|
| 960 | 96 | |
|
| 980 | 98 | |
|
| 1000 | 100 | |
|
| 1010 | 101 | |
|
| Length | No. teeth | Std. | GEN III |
|---|---|---|---|
| 1050 | 105 | |
|
| 1080 | 108 | |
|
| 1100 | 110 | |
|
| 1150 | 115 | |
|
| 1200 | 120 | |
|
| 1210 | 121 | |
|
| 1250 | 125 | |
|
| 1280 | 128 | |
|
| 1300 | 130 | |
|
| 1320 | 132 | |
|
| 1350 | 135 | |
|
| 1360 | 136 | |
|
| 1360 FN2 | 136 | ◯ | ◯ |
| 1400 | 140 | |
|
| 1480 | 148 | |
|
| 1500 | 150 | |
|
| 1600 | 160 | |
|
| 1700 | 170 | |
|
| 1720 | 172 | |
|
| 1800 | 180 | |
|
| 1800 FN4 | 180 | ◯ | ◯ |
| 1860 | 186 | |
|
| 1940 | 194 | |
|
Preferred belt width in mm: 16, 25, 32, 50,75, 100, 150 – Other dimensions on request
✓ Available
◯ Available on request
– Unavailable
FA with bigger back thickness
FN with profiles on the back of the belt
Technical Specification
| Standard (belt widths) | b (mm) | 16 | 25 | 32 | 50 | 75 | 100 |
| Tension member loadings | Fadm(N) | 2000 | 3500 | 4750 | 7750 | 12000 | 16000 |
| Belt weight | kg/m | 0.101 | 0.158 | 0.202 | 0.315 | 0.473 | 0.630 |
| GEN III (belt widths) | b (mm) | 16 | 25 | 32 | 50 | 75 | 100 |
| Tension member loadings | Fadm(N) | 3000 | 5000 | 6750 | 10750 | 16500 | 22000 |
| Belt weight | kg/m | 0.117 | 0.183 | 0.234 | 0.365 | 0.548 | 0.730 |
Drive Type A
| Type A | AT10 | GEN III |
|---|---|---|
| Zmin | 15 | 15 |
| dmin | 50 | 50 |
 |
||
Drive Type B
| Type B | AT10 | GEN III |
|---|---|---|
| Zmin | 25 | 25 |
| dmin | 120 | 120 |
 |
||
Zmin = Minimum number of teeth.
dmin = Minimum diameter (mm)
Related Products:
(2 votes, average: 5.00 out of 5)
Loading...